Pioneer Super Tuner IIID AVH-P5200BT, Service Manual

Page: 75 / 215

AVH-P5200BT/XNUC
75
5 6 7 8
5 6
7
8
C
D
F
A
B
E
STATUS = 00h, TP = B5h, D0 = 02h, (Display data for the test mode)
D1: Display data identifier exclusive for the test mode
[The values of D1 are as shown in the table below]
D2 – 9: Eight letters worth of display data in ASCII. (Status or results are displayed)
* Each coefficient (excluding the status display) outputs data at intervals of every second.
E.g.) Power-on (examples of “1-” in the continuous display specifications above)
D1 = 01h, set the status display data to D2 – D9 and transmit
[1 second later]
D1 = 02h, set the FE offset coefficient to D2 – D9 and transmit
[1 second later]
D1 = 03h, set the TE offset coefficient to D2 – D9 and transmit
:
:
[1 second later]
D1 = 07h, set the DBAL coefficient to D2 – D9 and transmit
[1 second later]
D1 = 01h, after setting the status display data to D2 – D9 and transmitting, wait for keys
2) Display data for the test mode
Value of D1 Purpose Continuous display specification
01h Status display
02h FE offset coefficient 1-1
03h TE offset coefficient 1-2
04h AS offset coefficient 1-3
05h ENV offset coefficient 1-4
06h TG offset coefficient 1-5
07h DBAL coefficient 1-6
30h VIN1 offset cancel value 1-7
31h VIN2 offset cancel value 1-8
32h VIN3 offset cancel value 1-9
33h VIN4 offset cancel value 1-10
34h VIN5 offset cancel value 1-11
35h VIN6 offset cancel value 1-12
36h VIN7 offset cancel value 1-13
37h VIN8 offset cancel value 1-14
38h VIN9 offset cancel value 1-15
39h VIN10 offset cancel value 1-16
08h FEMAX level 2-1
09h FEMIN level 2-2
0Ah ASMAX level 2-3
0Bh ENVMAX level 2-4
0Ch FE normalization coefficient 2-5
0Dh Spindle gain coefficient 2-6
0Eh TBAL coefficient (0 layer) 3-1
1Eh TBAL coefficient (1 layer) 3-2
10h TE normalization coefficient (0 layer) 3-3
20h TE normalization coefficient (1 layer) 3-4
40h Off-track adjustment result 3-5
11h FBAL coefficient (0 layer) 4-1
21h FBAL coefficient (1 layer) 4-2
12h Focus gain coefficient (0 layer) 4-3 5-2
22h Focus gain coefficient (1 layer) 4-4 5-3
13h Tracking gain coefficient (0 layer) 4-5 5-4
23h Tracking gain coefficient (1 layer) 4-6 5-5
14h AS normalization adjustment value (0 layer) 4-7 5-6
24h AS normalization adjustment value (1 layer) 4-8 5-7
15h Error ratio 5-1
16h TEMAX level 2-7
17h TEMIN level 2-8
50h RF level