Storing the strongest broadcast
frequencies
BSM (best stations memory) lets you automa-
tically store the six strongest broadcast fre-
quencies under preset tuning buttons
1
6
.
!
Storing broadcast frequencies with BSM
may replace broadcast frequencies you
have saved using buttons
1
6
.
%
Press LOCAL/BSM and hold until the
BSM turns on.
BSM
begins to flash. While
BSM
is flashing
the six strongest broadcast frequencies will be
stored under preset tuning buttons
1
6
in the
order of their signal strength. When finished,
BSM
stops flashing.
#
To cancel the storage process, press
LOCAL/BSM
.
Built-in CD Player
Playing a CD
1 Insert a CD into the CD loading slot.
Playback will automatically start.
#
Be sure to turn up the label side of a disc.
#
After a CD has been inserted, press
SOURCE
to select the built-in CD player.
#
You can eject a CD by pressing
EJECT
.
2 To perform fast forward or reverse,
press and hold
c
or
d
.
3 To skip back or forward to another
track, press
c
or
d
.
Pressing
d
skips to the start of the next track.
Pressing
c
once skips to the start of the cur-
rent track. Pressing again will skip to the pre-
vious track.
Notes
!
The built-in CD player plays one standard, 12-
cm or 8-cm CD at a time. Do not use an adap-
ter when playing 8-cm CDs.
!
Do not insert anything other than a CD into
the CD loading slot.
!
If an error message such as
ERROR-11
is dis-
played, refer to
Error messages
on page 11.
Repeating play
Repeat play lets you hear the same track over
again.
%
Press 5 repeatedly to turn repeat play
on or off.
When repeat play is on,
RPT
appears in the
display.
#
If you perform track search or fast forward/re-
verse, repeat play is automatically cancelled.
Playing tracks in random order
Random play lets you play back tracks on the
CD in a random order.
%
Press 4 repeatedly to turn random play
on or off.
When random play is on,
RDM
appears in the
display.
Scanning tracks of a CD
Scan play lets you hear the first 10 seconds of
each track on the CD.
1 Press 3 to turn scan play on.
SCAN
appears in the display. The first 10 sec-
onds of each track is played.
2 When you find the desired track press 3
to turn scan play off.
#
After scanning of a CD is finished, normal
playback of the tracks will begin again.
Pausing CD playback
Playback of the current track pauses.
%
Press 6 repeatedly to turn pause on or
off.
When pause is on,
PAUSE
appears in the dis-
play.
Operating this unit
En
8
Section
03
All manuals and user guides at all-guides.com
