Introduction of advanced
XM tuner operation
1
1
1
1
Function display
Shows the function names.
1
Press MULTI-CONTROL to display the
main menu.
FUNCTION
,
AUDIO
and
ENTERTAINMENT
appear on the display.
2
Use MULTI-CONTROL to select
FUNCTION.
Channel mode
appears on the display.
#
To return to the channel display, press
BAND
.
Note
If you do not operate the function within about 30
seconds, the display is automatically returned to
the channel display.
Switching the XM display
%
Press DISPLAY to switch the XM display.
Each press of
DISPLAY
changes the XM dis-
play in the following order:
Text information
—
Artist name and text infor-
mation
—
Song title and text information
—
Ca-
tegory name and text information
Storing broadcast stations
You can easily store up to six broadcast sta-
tions for later recall.
1
When you find a station that you want
to store in memory, turn MULTI-CONTROL
to switch to the preset channel list mode.
#
You can also perform this operation by press-
ing joystick on the remote control.
2
Use MULTI-CONTROL to store the se-
lected station in memory.
Turn to change the preset number; press and
hold to store.
The XM preset number you have selected will
flash and then remain lit. The selected station
has been stored in memory.
#
If you do not operate the list within about 30
seconds, the preset channel list mode is can-
celed automatically.
Notes
!
Up to 18 stations, six for each of three XM
bands can be stored in memory.
!
You can also store stations assigned to preset
tuning numbers by pressing and holding one
of the preset tuning buttons
1
–
6
on the re-
mote control.
Switching the XM channel
select mode
You have two methods for selecting a channel:
by number and by categoy.
When selecting by number, channels in any
category can be selected. Select by category
to narrow your search down to only channels
in a particular category.
XM tuner
En
43
English
Section
09
