- 10 -
En
gl
ish
The remote control is sold separately. For details concerning operations, see the remote
control manual.
1
Start the engine to boot up the system.
The [Select Program Language] screen appears.
NOTE
From the second time on, the screen shown will differ depending on the previous conditions.
2
Select the language.
3
Touch .
The [Speaker Mode Settings] screen appears.
4
Select the speaker mode.
[
Standard Mode
]
4-speaker system with front and rear speakers, or a 6-speaker system with front and
rear speakers and subwoofers.
[
Network Mode
]
3-way system with a high range speaker, middle range speaker and subwoofer (low
range speaker) for reproduction of high, middle and low frequencies (bands).
WARNING
Do not use the unit in Standard Mode when a speaker system for 3-way Network Mode is
connected to the unit. This may cause damage to the speakers.
5
Touch [OK].
The [DAB ANTENNA POWER SETTING] screen appears.
6
Touch [Yes] to use the DAB aerial power (page 46).
Initial Legal Disclaimer screen appears.
7
Touch [OK].
The home menu screen appears.
Basic operation
Remote control
Starting up the unit
