Black plate (8,1)
Connecting the power cord (1)
Depending on the types of vehicles, the
function of *2 and *4 may be different. In this
case, be sure to connect *1 to *4 and *3 to *2
as shown in the figure.
Connect leads of the
same colour to each other.
Yellow
(*2)
Back-up
(or accessory)
Red
(*4)
Accessory
(or back-up)
Yellow
(*1)
To terminal supplied with
power regardless of ignition
switch position.
Red
(*3)
To electric terminal controlled by
ignition switch (12 V DC) ON/OFF.
Orange/white
To lighting switch terminal.
Black (earth)
To vehicle (metal) body.
Note
Notes
·
When a subwoofer (*5) is connected to this product
instead of a rear speaker, change the rear output
setting in the initial setting. (Refer to Operation
Manual.) The subwoofer output of this product is
monaural.
·
When using a subwoofer of 70 W (2
Ω
), be sure to
connect with violet and violet/black leads of this
product. Do not connect anything with green and
green/black leads.
In some vehicles, the ISO connector may be divided
into two. In this case, be sure to connect to both
connectors.
Note
*2
*1
*4
*3
ISO connector
Speaker leads
White: Front
left
White/black: Front left
Grey: Front
right
Grey/black: Front
right
Green: Rear
left
or Subwoofer
(*5)
Green/black: Rear left
or Subwoofer
(*5)
Violet: Rear
right
or Subwoofer
(*5)
Violet/black: Rear
right
or Subwoofer
(*5)
<CRD4805-A>8
Engb
8
Section
02
Connection
