Pioneer SGY-PM910ZLW, User Manual

Page: 4 / 234

4
EN
In
tro
duc
tion
Switching modes
• When using SGX-CA500, the firmware version is required to be 20150501.02.43 or
higher.
• Pedaling monitor mode (Page 15)
Can be switched with SGX-CA500. Cannot be switched with cyclocomputers from
other manufacturers. When the mode is switched to pedaling mode, the LEDs on the
sensors
light
green for 10 seconds.
Current mode
Method 1
(Right sensor push switch)
Method 2
(SGX-CA500)
LED
lighting
method
Dual power meter Cannot be switched
○
The LEDs
light
green for 10
seconds
Single power meter Cannot be switched
○
• Dual power meter mode (Page 19)
The mode can be switched on SGX-CA500 or by operating the right sensor push
switch. When using with another manufacturer’s Cyclocomputer, switch using
method 1. When the mode is switched to powermeter mode, the LEDs
light
orange
for 10 seconds.
Current mode
Method 1
(Right sensor push switch)
Method 2
(SGX-CA500)
LED
lighting
method
Pedaling monitor Cannot be switched
○
The LEDs
light
orange for 10
seconds
Single power meter
○ ○