17
EN
Sp
eci
fi
ca
ti
o
n
s
and
s
u
ppor
t
Troubleshooting
Zero point calibration fails.
■
Cause
Solution
The crank is subjected to external
force or moving.
Calibrate the sensor in still condition (see page 14).
The Cyclocomputer display is not displaying correctly while I am riding.
■
Cause
Solution
Zero point calibration fails.
Calibrate the sensor when the values in [Force Preview] are
more than ± 3 N (see page 14).
There is a rattling noise when I am riding.
■
Cause
Solution
Screws used to install the sensor
are loose.
Retighten the screws.
The magnet is rubbing against the sensor or transmitter while I am riding.
■
Cause
Solution
Foreign objects are attached to
the magnet and rub against the
transmitter or the junction box.
Clean the transmitter, junction box, and magnet.
