background image

 

 

FCC Warning: 

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 

15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a 

residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed 

and used in accordance with the instructions, may cause harmful interference to radio communications. However, 

there is no guarantee that interference will not occur in a particular installation. If this equipment does cause 

harmful interference to radio or television reception, which can be determined by turning the equipment off and 

on, the user is encouraged to try to correct the interference by one or more of the following measures: 

  Reorient or relocate the receiving antenna. 

  Increase the separation between the equipment and receiver. 

  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 

  Consult the dealer or an experienced radio/TV technician for help. 

 

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your 

authority to operate this equipment. 

 

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This 

device may not cause harmful interference, and (2) this device must accept any interference received, including 

interference that may cause undesired operation. 

 

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable 

exposure condition without restriction. 

 

Summary of Contents for SE-MJ561BT-T










Reviews: