<ARB1526>
9
INSTALLING THE MONITOR
INTRODUCTION
CAUTION: BEFORE ATTACHING THE PROTECTIVE SCREEN
•
Do not handle the screen by yourself. (It weights 12.4 lbs/6.0 kg)
Have someone assist you when attaching or carrying the screen
to prevent any accidents.
•
Use a large-sized Phillips-head screwdriver for screwing and
unscrewing fasteners.
•
Handle the screen with care to avoid injury and to avoid leaving
fingerprints on the screen surface.
•
Carefully peel the vinyl covering from the front and back of the
protective screen. Inspect the screen and brush off any plastic
shavings or particles from the screen surface.
HOW TO ATTACH THE PROTECTIVE SCREEN
1.
Attach the lower panel frame to the monitor using five screws
starting with the center screw.
Do not overtighten the screws.
Overtightened screws may cause the acrylic protective panel to
warp.
Panel frame
Screen frame
Side view
2.
Insert the protective screen into the lower panel frame making
sure the labeled side is to be front.
Protective screen
3.
While holding the screen in place, attach the upper panel frame
to the screen and fasten five screws starting with the center screw.
Do not overtighten the screws.
Overtightened screws may cause the acrylic protective panel to
warp.
Panel frame
Side view
4.
Attach side frame covers:
1) Peel off adhesive strip from rear side of the frame cover.
2) Attach side frame cover along the aluminium edge guards
leaving a space of approximately 0 to 1/32 in. (0 to 1 mm)
from the upper panel frame.
Side frame
cover
Screen frame
Screen frame
Upper panel
frame
0 to 1 mm
(0 to 1/32 in.)
Side frame cover
Upper panel
frame
Upper frame cover
Lower frame cover
Remove
Attach
Frame cover
5.
Attach the remaining frame covers to the upper and lower panel
frames: first, insert the edge of the frame cover into the outer
groove of the panel frame, then starting at one end, push the
inner part of the frame cover over the inner edge of the panel
frame snapping it into place.
HOW TO REMOVE THE PROTECTIVE SCREEN
1)
First, remove the frame covers only from the upper and lower
panel frames. Care must be taken to avoid scratching the protective
screen or frame covers.
2)
Remove the screws from the upper panel frame and remove the
upper panel frame.
3)
Remove the protective screen from the lower panel frame and
remove the lower panel frame. Reattach panel frames and frame
covers as indicated in HOW TO ATTACH UPPER AND LOWER
TRIM ONLY.
NOTES FOR CARE AND CLEANING OF SCREEN:
•
Do not hit or throw anything onto the protective screen, as a
damaged protective screen may cause injury.
•
If the protective screen surface is dirty, wipe it with a cloth dipped
in warm water with mild detergent and then wrung out. Wipe it
dry with a soft, dry cloth.
•
Never use paint thinner or other cleaners to clean the protective
screen as they may contain harmful chemicals that will damage
the finish of the screen.
Label
