26
Connecting your equipment
03
Bi-wiring your speakers
Your speakers can also be bi-wired if they support bi-amping.
!
With these connections, the
Speaker System
setting makes no difference.
CAUTION
!
Don’t connect different speakers from the same terminal in this way.
!
When bi-wiring as well, heed the cautions for bi-amping shown above.
%
To bi-wire a speaker, connect two speaker cords to the speaker terminal on the receiver.
Installing your speaker system
At the very least, front left and right speakers only are necessary. Note that your main surround speakers should
always be connected as a pair, but you can connect just one surround back speaker if you like (it must be con-
nected to the left surround back terminal).
[A] 7.2.2 channel surround system (Surround back/Top middle) connection
!
If necessary, select ‘
7.2.2/5.2.2/7.2ch
’ from the
Speaker System
menu.
to do this.
!
When only connecting one surround back speaker, connect it to the
SURROUND BACK L (Single)
terminals.
!
In
Speaker Setting
, when
TMd
is set to
Dolby Sp (Front)
,
Dolby Sp (Surr)
, or
Dolby Sp (SB)
, connect the top
middle channel to Dolby Enabled Speaker.
PRE OUT
SURROUND SURR BACK T MIDDLE
(Single)
(Single)
FRONT
CENTER
SUBWOOFER
1
2
SPEAKERS
FRONT
CENTER
R
L
SURROUND
R
L
SURROUND BACK
R
L
TOP MIDDLE
R
L
EXTRA 1 EXTRA 2
L
R
EXTRA 1
R
L
SELECTABLE
LINE LEVEL
INPUT
LINE LEVEL
INPUT
Top middle left
Top middle right
Front left
Front right
Center
Subwoofer 2
Subwoofer 1
Surround left
Surround back right
Surround back left
Surround right
