30
> Before start > Hookup > Setup > Playback
Front Panel
1. INPUT SELECTOR dial: Switch the input to be played.
2. MCACC PRO indicator: This lights when you have
enabled the speaker calibration made with MCACC.
3. FL OFF indicator: This lights when you have pressed
DIMMER repeatedly to turn the display off.
4. INFO button: Switches the information on the display.
5. ZONE 2 ON/OFF button: Turn ZONE 2 on or off.
6. ZONE 3 ON/OFF button: Turn ZONE 3 on or off.
7. ZONE CONTROL button ( P27)
8. MULTI-ZONE MUSIC button ( P28)
9. Display ( P32)
10.Listening mode button ( P24)
11. NETWORK indicator: When the power of the unit is on,
this lights when "NET" is selected with the input selector
and the unit is connected to the network. If the unit is in
standby mode, this lights when functions such as HDMI
CEC and network standby are enabled. It does not light
when ZONE 2/ZONE 3 is on, however.
12.Remote control sensor
13.WIRELESS indicator: Lights when the unit is connected
to the wireless network.
14.MASTER VOLUME dial
15.
Í
STANDBY/ON button
16.ADJUST button (AV Adjust) ( P28)
17.HOME button ( P29)
18.Cursor buttons (TUNE
/ PRESET
button) and
ENTER button: Select the item with the cursors and
press ENTER to confirm your selection. When using the
TUNER, select the frequency with TUNE
, or select
preset stations with PRESET
.
19.RETURN button: Returns the display to the previous state.
20.TUNING MODE button: Switches the tuning mode.
21.PHONES jack: Stereo headphones with a standard plug
(1/4 inch or ø6.3 mm) are connected.
22.MCACC SETUP MIC jack ( P22)
23.PHASE CONTROL button: This turns on or off the Phase
Control that corrects phase disturbance in the low range
to enhance the bass.
24.USB port: A USB storage device is connected so that music
files stored in it can be played. You can also supply power
(maximum 5V/1A) to USB devices with a USB cable.
25.AUX INPUT HDMI jack ( P14)
26.DIMMER button: You can adjust the brightness of the
display in four steps.
27.Front flap
1
4
3
5
8
2
7
6
9
18
17
21
22
20
19
10
11 12
13
15
16
14
23
24
25
26
27
27
Part Names
Summary of Contents for SC-LX901
Page 35: ...35 ...
