12
SC-LX81
1
2
3
4
A
B
C
D
E
F
1
2
3
4
• Before making or changing the connections, switch
off the power and disconnect the power cord from the
power outlet. Plugging in should be the final step.
1 LAN (10/100) terminal
2 HDMI connectors (x6 (SC-LX
8
1), x5 (SC-LX71))
Multiple inputs and one (SC-LX71) or two (SC-LX
8
1)
outputs for high-quality audio/video connection to
compatible HDMI devices.
3 Optical and coaxial digital audio inputs
(x7 (SC-LX
8
1), x6 (SC-LX71))
Use for digital audio sources, including D
V
D players/
recorders, digital satellite receivers, CD players, etc.
4 Optical digital audio outputs (x2)
Use for recording to a CD or MiniDisc recorder.
ZONE3/SOURCE OUT
jack is also used for MULTI-ZO
N
E
connections.
5 12 V trigger jacks
(total 50 mA max.)
(x2)
Use to switch components in your system on and off
according to the input function of the receiver.
6 Remote inputs/output
Use for connection to an external remote control sensor
for use in a MULTI-ZO
N
E setup, for example.
7 Control input/output
Use to connect other Pioneer components so that you
can control all your equipment from a single IR remote
sensor.
8
RS-232C connector
Use for connection to a PC for graphical output when
using Advanced MCACC or Full Band Phase Control.
9 Component video inputs (x3)
Use the inputs to connect any video source that has
component video output, such as a D
V
D player.
10
SC-LX
8
1 only:
ZONE 2 component video output
Use to connect monitors or T
V
s in a separate room.
11 MULTI-ZONE audio/video outputs
Use to connect a second or third amplifier and monitors
or T
V
s in a separate room.
12 Stereo analog audio source inputs/(outputs) (x4)
Use for connection to audio sources such as CD players,
tape decks, turntables, etc.
13 Composite, S-Video and Component monitor
outputs
Use to connect monitors and T
V
s.
14 Audio/video source inputs/(outputs) (x
8
)
Use for connection to audio/visual sources, such as D
V
D
players/recorders,
V
CRs, etc. Each set of inputs has jacks
for composite video, S-
V
ideo and stereo analog audio.
15 AM and FM antenna terminals
Use to connect indoor or outdoor antennas for radio
broadcasts.
16 Multichannel pre-amplifier outputs
Use to connect separate amplifiers for front, center,
surround, surround back and subwoofer channels.
17 Multichannel analog audio inputs
7.1 channel inputs for connection to a D
V
D player with
multichannel analog outputs.
1
8
Speaker terminals
Use for connection to the main front, center, surround
and surround back speakers.
19 AC power inlet
Connect the supplied power cord here.
[2] Rear Panel
