background image

Getting started

04

14

Chapter 4:

Getting started

To turn the power on

Press the 

 STANDBY/ON

 on the remote control or the 

/I

  

on the main unit to turn the power on.

About startup time:

About 30 seconds are required between turning on the power 

and being able to use the network function. The time required 

for startup can be reduced by setting the network standby 

mode to on (page 43).

After use:

Press the 

 STANDBY/ON

 to enter the power stand-by mode.

Setting the clock

1

Press 

 STANDBY/ON to turn the power on.

2

Press CLK/TIMER on the remote control.

“CLOCK” is shown on the main display.

3

Press ENTER.

4

Press 

/

 to set the day, then press ENTER.

5

Press 

/

 to set the hour, then press 

ENTER.

6

Press 

/

 to set the minute, then press 

ENTER to confirm.

7

Press ENTER.

To confirm the time display:

Press the 

CLK/TIMER

. The time display will appear for about 

10 seconds.

To readjust the clock:

Perform “Setting the clock” from step 1.

 Note

• When power supply is restored after unit is plugged in 

again or after a power failure, reset the clock.

General control

Input function

When the 

INPUT SELECT

 on main unit is pressed, the current 

function will change to different mode. Press the 

INPUT 

SELECT

 repeatedly to select desired function.

Input can also be switched by pressing input selection 

buttons on the remote control.

Display brightness control

Press 

DIMMER

 to dims the display brightness. The 

brightness can be controlled in four steps.

Volume auto setting

If you turn off and on the main unit with the volume set to 31 

or higher, the volume starts at 30.

Volume control

Press the 

VOLUME –/+

 on the unit or press 

/–

 on 

the remote control to increase or decrease the volume.

Subwoofer volume control

Press 

SUBWOOFER VOL +/–

 on the remote control to 

increase or decrease the volume of the subwoofer.

Muting

The volume is muted temporarily when pressing the 

MUTE

 on 

the remote control. Press again to restore the volume.

TV(OPT)

BD/DVD(COAX)

Analog In

DAB

FM

BT AUDIO

USB/iPod

Spotify

Music Server

Favorites

SBX-B70D.book  14 ページ  2015年4月13日 月曜日 午後2時6分

Summary of Contents for SBX-B70D





































































Reviews: