Pioneer PYR009AZFRVBKE Owner'S Manual Download Page 6 | Manualshive

Page: 6 / 26

Pioneer PYR009AZFRVBKE Owner'S Manual Download Page 6

4

[email protected]

|

(800)-675-7410

|

https://www.pdhvac.com/support/

Best Practices for Optimal Performance

O

PERATIONAL

I

NSTRUCTIONS

For best results, the following tips are given in order to improve the output and

efficiency of the machine:

Increase the vehicle’s insulation amount by sealing off openings and covering

glass surfaces with reflective or blackout curtains.
When running the machine, select the desired temperature and fan speed and

ensure that the air vents are oriented in a suitable and proper direction.
Avoid the frequent opening of doors and/or windows when not necessary.

To prevent mechanical malfunctions and minimize risk of personal injury, ensure

that the following precautions are abided by:

Avoid obstruction of the ventiled air inlet. Do not cover with cloth, paper, etc.
Do not put hands or insert fingers into any of the machine’s openings.
Do not spray water into or onto the surface of the machine.
Keep flammable substances and objects 3 feet or more away from the machine.
Clean the machine’s air filters periodically.

«
...
4
5
6
7
8
...
»

Summary of Contents for PYR009AZFRVBKE



























Reviews:

No comments