Pioneer Premier PRS-D1100M, Owner'S Manual

Page: 16 / 113

15
Specifications
Power source ........................................................................................................ 14.4 V DC (10.8 V to 15.1 V allowable)
Grounding system .......................................................................................................................................... Negative type
Current consumption ........................................................................................................ 39 A (at continuous power, 4
Ω
)
Average current drawn* .......................................................................................................... 12 A (4
Ω
for one channel)
20 A (2
Ω
for one channel)
28 A (1
Ω
for one channel)
Fuse (external) ........................................................................................................................................................ 40 A
×
2
Dimensions ...................................................................................................................... 304 (W)
×
56 (H)
×
195 (D) mm
Weight .................................................................................................................... 2.9 kg (Leads for wiring not included)
Maximum power output ................................................................................ 800 W
×
1 (4
Ω
) / 1 200 W
×
1 (1
Ω
to 2
Ω
)
Continuous power (14.4 V) ...................................... NORMAL mode: 4
Ω
, 20 Hz to 240 Hz, 1.0% THD, 400 W
×
1
2
Ω
, 100 Hz, 1.0% THD, 600 W
×
1
HI-CURRENT mode: 4
Ω
, 20 Hz to 240 Hz, 1.0% THD, 150 W
×
1
2
Ω
, 100 Hz, 1.0% THD, 300 W
×
1
1
Ω
, 100 Hz, 1.0% THD, 600 W
×
1
Load impedance ........................................................................................................................ 4
Ω
(1
Ω
to 8
Ω
allowable)
Frequency response .......................................................................................................... 10 Hz to 240 Hz (+0 dB, –3 dB)
S/N ratio ........................................................................................................................................ 92 dB (IEC-A network)
Distortion .......................................................................................................................................... 0.5 % (10 W, 100 Hz)
Low pass filter ............................................................................................................ Cut off frequency: 40 Hz to 240 Hz
Cut off slope: –18 dB/oct
Subsonic filter (HPF) .............................................................................................................................. Frequency: 20 Hz
Slope: –18 dB
Bass boost ................................................................................................................................................ Frequency: 50 Hz
Level: 0 / 6 / 9 / 12 dB
Gain control .................................................................................................................................... RCA: 400 mV to 6.5 V
SP: 1.6 V to 26 V
Maximum input level / impedance ...................................................................................................... RCA: 6.5 V / 22 k
Ω
SP: 26 V / 90 k
Ω
Note:
• Specifications and the design are subject to possible modification without notice
due to improvements.
*Average current drawn
• The average current drawn is nearly the maximum current drawn by this unit
when an audio signal is input. Use this value when working out total current
drawn by multiple power amplifiers.