You can listen to the radio by using the naviga-
tion system. This section describes operations
for radio (FM).
%
Touch [FM] on the
“
AV Source
”
menu to
display the
“
FM
”
screen.
=
For details concerning operations, refer to
Reading the screen
7
4
3
2
1
6
5
1
Source icon
Shows which source has been selected.
2
Band indicator
Shows which band the radio is tuned to: FM1
to FM3.
3
Preset number indicator
Shows what preset item has been selected.
4
Frequency indicator
5
LOCAL
indicator
Shows when local seek tuning is on.
6
STEREO
indicator
Shows that the frequency selected is being
broadcast in stereo.
7
Signal level indicator
Using the touch panel keys
1
2
3
5
6
4
1
Recalls equalizer curves
=
For details, refer to
2
Displaying the
“
Function
”
menu
=
For details, refer to
3
Select a preset channel
[
c
] or [
d
] can be used to switch preset chan-
nels.
4
Perform manual tuning
To perform manual tuning, touch [
c
] or [
d
]
briefly. The frequencies move up or down one
step at a time.
Perform seek tuning
To perform seek tuning, keep touching [
c
] or
[
d
] for about one second and release. The
tuner will scan the frequencies until a broad-
cast strong enough for good reception is
found.
p
You can cancel seek tuning by touching
either [
c
] or [
d
] briefly.
p
If you keep touching [
c
] or [
d
], you can
skip broadcasting frequencies. Seek
tuning will start as soon as you release
the keys.
p
Moving
MULTI-CONTROL
left or right
enables you to perform the equivalent
operations.
5
Select an FM band
Touch [
Band
] repeatedly until the desired FM
band is displayed,
FM1
,
FM2
or
FM3
.
p
This function is convenient for preparing
different preset lists for each band.
6
Displaying the map screen
Using the radio (
FM
)
En
100
Chapter
18
