Pioneer PDR-F10, Service Manual

Page: 58 / 82

58
PDR-F10
[Procedure]
1. Move the Pickup to center of the disc by pressing the CHAPTER key. (
4 ¢
)
2. Monitor the jitter value and set a CD disc. (use the jitter meter)
3. Press the
2
x3 key to FOCUS IN.
4. Press the PLAY key to turn the SPINDLE. (CAV)
5. Press the PAUSE key to TRACKING ON. (EFM CLV)
6. Adjust the SCAN key so that jitter value becomes minimum.
7. Press the SEARCH key to register the adjustment.
\
Shift to the RFDC Level Adjustment automatically.
8. Adjustment is completed automatically.
\
Each display the reason that became abnormal when adjustment was not completed normally.
When did not converge in limit of adjustment possibility
(when it became the lowest level)
When failed in writing to the EEPROM
9. Press the STOP key to stop the operation.
Caution:
In this adjustment, shift to the RFDC Adjustment when pressing the SEARCH key before step 7, and there
is it when completed in normal on the indication.
However, must not omit operation of steps 5 from 3 because RFDC is not adjusted to normal when
pressing the SEARCH key with the state that steps 5 from 3 are not executed.
How to execute the automatic adjustment once again after the automatic adjustment is completed:
1. Press the STOP key to stop the disc rotation. (servo OFF)
2. Press the CX key and shift to the Focus Offset adjustment.
3. Press the SIDE A key to start the automatic adjustment.
Adjust from "6.6.11 automatic Adjustment Start" to "6.6.13 Focus Bias Adjustment".
Press the STOP key when stops execution of the automatic adjustment on the way and stop processing. Then return to the state of
"6.6.10 Preparations" and stop the operation.
6.6.13 Focus Bias Adjustment
Minimize jitter value
CN102-pin 2 (RF) Test Point
Adjustment Value
Focus-in does not function, sound pauses, bad RF wave shape, or incapable to
playback some disks.
Optimizing DC offset voltage of focus servo loop circuit including pickup.
Purpose
Symptom when Out of Adjustment
Adjustment method
FL Indication
CN102
RF
VC
2
6
10: 1 prove Oscilloscope