4
English
2
How to route cables
Speed clamps and bead bands are included with the plasma
display for tidying your cables and keeping extra cable
length out of the way.
NOTE:
Cables can be routed to the right or left.
1 Organize cables together using the
speed clamps provided with the
plasma display.
Insert
1
into an appropriate hole on the rear of the unit, then
snap
2
into the back of
1
to fix the clamp.
Speed clamps are designed to be difficult to undo once in
place. Please attach carefully.
To remove speed clamps
Using pliers, twist the clamp 90° and pull it outward.
In some cases the clamp may have deteriorated over time
and may be damaged when removed.
1
2
To the right
*As viewed from the rear of the display.
Speed clamps
Speaker cable
To the left
System cable
To attach the speed clamps to the main unit
Connect the speed clamps using the 4 holes marked with •
below, depending on the situation.
Speaker cable
Speed clamps
Speed clamps
Speaker cable
System cable
Speaker cable
Speed clamps
Summary of Contents for PDP-S27-LR
Page 26: ...27 ...
