3
English
English
INSTALLATION ON THE PLASMA
DISPLAY
(WHEN INSTALLING THE SPEAKERS ON THE RIGHT AND
LEFT SIDES OF THE DISPLAY)
1
Attach the mounting fittings to the
speakers.
The illustration below shows the right speaker.
1
Align the convex portion of the holder for installing the
speakers on the right and left sides with the concave
portion of the speakers.
2
Fix the two points with screws.
3
Attach holders to the top and bottom of one speaker.
4
Similarly, attach two holders to
the top and bottom of the other
speaker.
2
Attach the speakers to the display.
The illustration below shows how to attach of the right speaker.
1
Fix the upper screw temporarily in
advance to hang the speaker on
the display (In this case, leave a
space of about 5 mm between the
head of the screw and the display).
2
Hang the speaker on the upper
screw.
3
Fix the lower screw temporarily.
4
Adjust the position so that the speaker is parallel to the
display and then fix the upper and lower screws firmly.
Perform installation according to the following steps
1
to
2
.
INSTALLATION ON THE PLASMA
DISPLAY
(WHEN INSTALLING THE SPEAKERS AT THE BOTTOM
OF THE DISPLAY)
1
Attach the mounting fittings to the
display.
1
Push rivets into each outside hole
A
of brackets (on the
right and left sides) for installing the speakers at the bottom.
2
Fix each outside hole
B
of brackets (on the right and left sides),
for installing the speakers at the bottom, with screws.
3
Insert the screws into the two outside holes of bracket
(at the center), for installing the speakers at the bottom,
and tighten them.
4
Align the bosses of the spacer with the holes of the stand
and insert them.
2
3
5mm
The display
1
2
4
3
Perform installation according to the following steps
1
to
2
.
5
Attach the left speaker following the
same procedure as described above.
1
1
2
2
B
B
A
A
PDPS13LR.01-06/En
2003.5.27, 2:59 PM
3
