Pioneer PDP-504PE, Service Manual

Page: 49 / 100

PDP-504PU
49
5 6 7 8
5 6
7
8
C
D
F
A
B
E
• RS-232C Commands for the module microcomputer
Command Name Function
Validity of direct numeric input
Validity Lower limit Upper limit
1 ABL ABL ADJUSTMENT Adjusting the upper limit of the power
?
0000 255
2 AMN AUDIO MUTE NO Turning off the audio muting
3 AMY AUDIO MUTE YES Turning on the audio muting
4 BAL BALANCE ADJUSTMENT Adjusting the audio balance
?
98 158
5 BAS BASS ADJUSTMENT Adjusting the audio bass
?
121 135
6 BCP BACKUP COPY Copying the backup data in the EEPROM
7 CTM CLEAR TRAP MEMORY Clearing the TRAP log that records detection of opening of the rear cover
8 DRF DRIVE OFF Driving off
9 DRN DRIVE ON Driving on
10 F50 FREQENCY VIDEO 50Hz Setting the frequency in Mask mode to 50 Hz (VIDEO)
11 F60 FREQENCY VIDEO 60Hz Setting the frequency in Mask mode to 60 Hz (VIDEO)
12 F61 FREQENCY PC 60Hz Setting the frequency in Mask mode to 60 Hz (PC)
13 F70 FREQENCY PC 70Hz Setting the frequency in Mask mode to 70 Hz (PC)
14 F72 FREQENCY VIDEO 72Hz Setting the frequency in Mask mode to 72 Hz (VIDEO)
15 F75 FREQENCY VIDEO 75Hz Setting the frequency in Mask mode to 75 Hz (VIDEO)
16 FAJ FINISH ADJUSTMENT Z-number F003 to 0003
17 FCN FOCUS NO Turning the FOCUS function off
18 FCY FOCUS YES Turning the FOCUS function on
19 GAJ GET ADJUSTMENT Obtaining various adjustment values
20 GPD GET POWER-DOWN Obtaining the power-down-point log
21 GPW GET PANEL WHITE BALANCE Obtaining the panel white-balance adjustment values
22 GS1 GET STATUS 1 Obtaining information on the unit, such as the software version
23 GS2 GET STATUS 2 Obtaining information on the status of the unit, such as the temperature
24 GSD GET SHUT DOWN Obtaining information on shutdown
25 LNN LOUDNESS NO Turning the Loudness function off
26 LNY LOUDNESS YES Turning the Loudness function on
27 M00 MASK MODE 0 Turning the Mask function off
28 M01 MASK MODE 1 White raster (change in luminance level)
29 M02 MASK MODE 2 White raster--zigzag, exact reverse--scan--gray--white raster
30 M03 MASK MODE 3 White raster--zigzag, exact reverse--scan--gray--white raster
31 M10 MASK MODE 10 H ramp (slant 1)
32 M11 MASK MODE 11 H ramp (slant 4)
33 M12 MASK MODE 12 H ramp (slant 1 shifting)
34 M13 MASK MODE 13 H ramp (slant 4 shifting)
35 M14 MASK MODE 14 V ramp (slant 1)
36 M15 MASK MODE 15 Slanting ramp
37 M20 MASK MODE 20 Window (for WB adjustment, Hi = 870, Lo = 102)
38 M21 MASK MODE 21 Window (for WB adjustment, Hi = 1023, Lo = 102)
39 M22 MASK MODE 22 Window (for measuring the peak luminance during WB adjustment, Hi = 1023)
40 M23 MASK MODE 23 Window (for measuring the peak luminance, Hi = 1023, 4%)
41 M24 MASK MODE 24 Window (for measuring the peak luminance, Hi = 1023, 1.25%)
42 M25 MASK MODE 25 Window (vertical line with 1/7-width for measuring the stress)
43 M26 MASK MODE 26 Window (magenta, green, and stripe for check)
44 M27 MASK MODE 27 Window (green,magenta, and stripe for checker)
45 M28 MASK MODE 28 Window (black & white [1 x 8], checker, for EMG check)
46 M29 MASK MODE 29 Window (for WB adjustment, magenta = 512, yellow = 512)
47 M2E MASK MODE 2E Wiper for erasing afterimage
48 M2F MASK MODE 2F Mask for warning of cable disconnection
49 M30 MASK MODE 30 ColorBar
50 M31 MASK MODE 31 Slanted lines (for checking cable disconnection)
51 M51 MASK MODE 51 Raster-white
52 M52 MASK MODE 52 Raster-red
53 M53 MASK MODE 53 Raster-green
54 M54 MASK MODE 54 Raster-blue
55 M55 MASK MODE 55 Raster-black
56 M56 MASK MODE 56 Raster-cyan 1023
57 M57 MASK MODE 57 Raster-magenta 1023
58 M58 MASK MODE 58 Raster-yellow 1023
59 M59 MASK MODE 59 Raster-cyan 274
60 M60 MASK MODE 60 Raster-flesh color_50
61 M61 MASK MODE 61 Raster-light purple_50
62 M62 MASK MODE 62 Raster-sky blue_50
63 M63 MASK MODE 63 Raster-red 779
64 M64 MASK MODE 64 Raster-cyan 218
65 M65 MASK MODE 65 Raster-cyan 448