Pioneer PDP 503CMX, Service Manual

Page: 117 / 167

PDP-503CMX
117
5 6 7 8
5 6
7
8
C
D
F
A
B
E
GWB (Get White Balance):
Outputting data related to picture quality / white balance
• Data are output according to the transmission order and size in the table below.
• This command is valid only in Normal Operation mode, RS-232C Integrator Adjustment mode, and RS-232C Factory adjustment mode.
• In Normal Operation mode and RS-232C Integrator Adjustment mode, data for the current signal and color mode of the current input
function in the Integrator area are output.
• In RS-232C Factory Adjustment mode, RGB2 data for the Factory mode are output.
(Note 1) As for the setting data not related to the current input function/input signal/setting, dummy data are output.
(Note 2) If data are output when the Reference mode is selected, the same data as the reference data are output as the offset data.
Order Data Contents Size Remarks
1
CONTRAST
3 byte
2 3 byte (Note 2)
3
BRIGHT
3 byte
4 3 byte (Note 2)
5
COLOR
3 byte (Note 1)
6 3 byte (Note 2)
7
TINT
3 byte (Note 1)
8 3 byte (Note 2)
9
R HIGH
3 byte
10 3 byte (Note 2)
11
G HIGH
3 byte
12 3 byte (Note 2)
13
B HIGH
3 byte
14 3 byte (Note 2)
15
R LOW
3 byte
16 3 byte (Note 2)
17
G LOW
3 byte
18 3 byte (Note 2)
19
B LOW
3 byte
20 3 byte (Note 2)
21 H.ENHANCE (H.SHARP) 3 byte
22 V.ENHANCE (V.SHARP) 3 byte