Pioneer PDP-42MXE20, Service Manual, Page: 54 / 120

PDP-427CMX
54
1 2 3 4
1 2 3 4
C
D
F
A
B
E
8. ETC.
<Lower-layer items of ETC.>
• "NO OPRT" is selected when this submode is entered (to avoid accidental misoperation).
• When each item is set, the process starts then the unit shifts to the upper layer. (When NO OPRT is determined,
the unit will shift to the upper layer without doing anything.)
• When data are set to be backed up, if the digital EEPROM has not been adjusted,
do the operation of LED pattern No. 7.
A . P N
T E C
E L
L / 1
(
B T 6 0 V S )
F A C T
T E C . ) ( +
A . P N E L
L / 1
(
B T 6 0 V S )
F A C T
A P R O M B C K U P E E > < =
T E C .
O : N P R T O
<DOWN> : Shifting to MASK SETUP
<UP> : Shifting to PANEL REVISE
<DISPLAY> : Shifting to MASK SETUP
<SET>
: Shifting to the next nested layer
7
Key operation
<DOWN> : Shifting to the next item
<UP> : Shifting to the previous item
<RIGHT> : Adding by one to the adjustment
value
<LEFT> : Subtracting by one from the
adjustment value
<SET> : Determining the setting value
and shifting to the upper layer
<DISPLAY> : Shifting to MASK SETUP
7
Key operation
No. Items Adjustment/Setting Value Remarks
1 BACKUP DATA <=> <=>NO OPRT<=>TRANSFER<=>
"ERR" is indicated when no data are in the backup
EEPROM. To activate the option to select
TRANSFER, press the SET key about 5 seconds.
(There is a situation resting more than 5 seconds.)
2 DIGITAL EEPROM <=> <=>NO OPRT<=>REPAIR/DELETE<=>
"DELETE" is indicated when the main unit has been
already adjusted. To activate the option to select
REPAIR/DELETE, press the SET key about 5
seconds.
(There is a situation resting more than 5 seconds.)
3 PD INFO. <=> <=>NO <=>CLEAR<=>
To activate the option to select CLEAR, repeatedly
press the SET key about 5 seconds.
(There is a situation resting more than 5 seconds.)
4 SD INFO. <=> <=>NO <=>CLEAR<=>
5 HR-MTR INFO. <=> <=>NO <=>CLEAR<=>
6 PM/B1-B5 <=> <=>NO <=>CLEAR<=>
7 P COUNT INFO. <=> <=>NO <=>CLEAR<=>
I – N 1 F R 3 2 – G B – 4 X M
I – N 1 F R 3 2 – G B – 4 X M