Enjoying DTV broadcasts
09
38
En
Sorting preset DTV channels
Use the following procedure to change the sequence of the preset DTV
channels.
1 Repeat steps 1 to 4 provided for “Setting Channel Options“.
2 Select “Channel Sort“ (
/
then ENTER).
The Sort screen appears.
3 Select a channel to be shifted (
///
then ENTER).
4 Select a new location (
///
then ENTER).
Sorting is executed.
5 Press HOME MENU to exit the menu.
Note
• To change a page on the Sort screen in step
4
, select
/
on the
screen with
///
to select a page, and then press
ENTER
.
• You can select "DTV Setup" only when watching DTV channels.
Selecting a digital audio format
Use the following procedure to switch between the PCM and Dolby
digital audio format.
1 Press HOME MENU.
2 Select “Setup“ (
/
then ENTER).
3 Select “DTV Setup“ (
/
then ENTER).
4 Select “User Preferences“ (
/
then ENTER).
5 Select “Digital Audio“ (
/
).
6 Select “PCM“ or “Dolby“ (
/
).
Note
• You can select "DTV Setup" only when watching DTV channels.
Selecting languages for audio, subtitles, and
teletext
You may manually configure language settings for audio, subtitles,
and teletext.
1 Repeat steps 1 to 4 provided for “Selecting a digital audio
format“.
2 Select “Language Settings“ (
/
then ENTER).
3 Select “Primary Audio“, “Secondary Audio“, “Primary
Subtitle“, “Secondary Subtitle“ or “Teletext“ (
/
).
4 Select a language (
/
).
Note
• The plasma television automatically selects the language based on
the "Country" setting (page 25) when the selected language for
audio, subtitle, or teletext is not available.
• You can select "DTV Setup" only when watching DTV channels.
Using Software Update
This function downloads and updates the system's software at the
specified timing.
Using Auto Update
With this function on, the plasma television checks if updated software
is available and then downloads it (as necessary). After this, the
system executes Add New Channels operation (page 35). This series of
operations are automatically executed at the specified time.
1 Press HOME MENU.
2 Select “Setup“ (
/
then ENTER).
3 Select “DTV Setup“ (
/
then ENTER).
4 Select “Software Update“ (
/
then ENTER).
5 Select “Auto Update“ (
/
).
6 Select “On“ (
/
).
Note
• We recommend that you normally select "On".
• For Auto Update to start, there must be more than 1 hour left to the
start of the next preset recording/watching.
Channel Sort
1/3
007
008
009
010
************
************
******
************
011
012
******
************
001
002
003
************
******
************
004
005
******
************
006 ************
User Preferences
Digital Audio
Language Settings
PCM
Software Update
Set Update Time
Start Manual Update
Auto Update
Technical Information
On
PDP4270XD_En.book Page 38 Friday, June 16, 2006 5:32 PM
