PDP-5016HD
128
1
2
4
1
2
3
4
C
D
F
A
B
E
Is the TCP control signal normal?
(See the oscilloscope photos.)
No
NG
NG
Yes
Yes
No
Are the FFC cables properly
connected?
Replace the DIGITAL Assy.
Properly connect the FFC cables.
The abnormality is associated with
one address or one TCP?
Diagnose the ADDRESS Assy.
In most cases of damage on one line,
the panel chassis must be replaced.
If the FFC cable that connects the DIGITAL and ADDRESS Assys is in failure,
the abnormality is associated with one address in most cases.
Replace the panel chassis.
No
NG
Yes
Yes
Yes
Yes
No
Is the cable connected properly
to the 15-pin connector?
Are the cables connected properly
between the SCAN A and B Assys?
Connect the cable properly.
No
Reconnect the cables properly.
NG
Yes
Is the waveform of the SCAN IC
control signal from the Y DRIVE
Assy normal?
No
Replace the Y DRIVE Assy.
The abnormality is associated
with a single scan line.
Diagnose the SCAN A and B Assys.
Check with the slanting ramp mask that moves.
The panel mask is not displayed
properly.
Failure analysis for the
drive system
⇒
DR3
Failure analysis for the
drive system
⇒
DR4
Failure analysis for the
drive system
Failure analysis for the
drive system
⇒
DR2
Is the waveform normal when the
voltage is applied to the panel?
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299