Pioneer PDK-50HW3, Operating Instructions Manual

Page: 6 / 99

19
日本語
En
English
Fran
çais
Deutsch
Italiano
Nederlands
Espa
ñ
ol
Chinese
Tip
Cap
Pen tip
(corresponds to left mouse button)
LED indicator
Battery cover
Large button
(corresponds to right
mouse button)
Small button
(The function corresponding to middle
mouse button can be assigned using
the driver software.)
Holes in rear end of pen
Pen
If pen operation becomes difficult:
The pen may fail to operate properly if the holes in
rear end of pen are blocked. Also, the pen may
begin operating erratically when the battery
becomes depleted. In this event, change the
battery at your earliest opportunity.
Confirming Battery Life:
When the small button is depressed fully, an LED
indicator will light. If the indicator fails to light, or
lights only dimly, the battery is depleted and
should be replaced.
NOTES:
÷
Insert battery correctly, al/– polarities
with the indications on the battery case.
÷
To prevent damage from battery leakage,
remove the battery when not using the pen for
an extended period (1 month or more). If battery
leakage occurs, wipe away any battery fluid
from inside the case and replace the battery
with a new one.
÷
The provided alkaline battery should not be
recharged, short-circuited, disassembled, or
disposed of in fire.
÷
When disposing of used batteries, please
comply with governmental regulations or
environmental public instruction’s rules that
apply in your country / area.
AAA (LR03) alkaline battery
Battery cover
Changing the Pen Battery
Replacing the Pen Tip
If the tip becomes deformed and writing quality
deteriorates, replace the tip with one of the
supplied extras.
1. Pull out the tip.
CAUTION:
If you continue using a pen with a damaged or worn
tip, the monitor screen may be damaged.
2. Insert a new tip.
NAME AND FUNCTION OF PARTS