background image

En-

2

Important Safety Instructions

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in

accordance with the manufacturer’s instruc-
tions.

8. Do not install near any heat sources such as

radiators, heat registers, stoves, or other appa-
ratus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized

or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding
type plug has two blades and a third grounding
prong. The wide blade or the third prong are pro-
vided for your safety. If the provided plug does not
fit into your outlet, consult an electrician for
replacement of the obsolete outlet.

10. Protect the power cord from being walked on or

pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.

11. Only use attachments/accessories specified by

the manufacturer.

12. Use only with the cart,

stand, tripod, bracket, or
table specified by the man-
ufacturer, or sold with the
apparatus. When a cart is
used, use caution when
moving the cart/apparatus
combination to avoid injury
from tip-over.

13. Unplug this apparatus during lightning storms

or when unused for long periods of time.

14. Refer all servicing to qualified service person-

nel. Servicing is required when the apparatus
has been damaged in any way, such as power-
supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or
has been dropped.

15. Damage Requiring Service

Unplug the apparatus from the wall outlet and
refer servicing to qualified service personnel
under the following conditions:
A. When the power-supply cord or plug is damaged,
B. If liquid has been spilled, or objects have

fallen into the apparatus,

C. If the apparatus has been exposed to rain or

water,

D. If the apparatus does not operate normally

by following the operating instructions.
Adjust only those controls that are covered
by the operating instructions as an improper
adjustment of other controls may result in
damage and will often require extensive
work by a qualified technician to restore the
apparatus to its normal operation,

E. If the apparatus has been dropped or dam-

aged in any way, and

F. When the apparatus exhibits a distinct

change in performance this indicates a need
for service.

16. Object and Liquid Entry

Never push objects of any kind into the appara-
tus through openings as they may touch dan-
gerous voltage points or short-out parts that
could result in a fire or electric shock.
The apparatus shall not be exposed to dripping
or splashing and no objects filled with liquids,
such as vases shall be placed on the appara-
tus.
Don’t put candles or other burning objects on
top of this unit.

17. Batteries

Always consider the environmental issues and
follow local regulations when disposing of bat-
teries.

18. If you install the apparatus in a built-in installa-

tion, such as a bookcase or rack, ensure that
there is adequate ventilation.
Leave 20 cm (8") of free space at the top and
sides and 10 cm (4") at the rear. The rear edge
of the shelf or board above the apparatus shall
be set 10 cm (4") away from the rear panel or
wall, creating a flue-like gap for warm air to
escape.

WARNING:

TO REDUCE THE RISK OF FIRE OR 
ELECTRIC SHOCK, DO NOT EXPOSE THIS 
APPARATUS TO RAIN OR MOISTURE.

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, 
DO NOT REMOVE COVER (OR BACK). NO 
USER-SERVICEABLE PARTS INSIDE. REFER 
SERVICING TO QUALIFIED SERVICE 
PERSONNEL.

The lightning flash with arrowhead symbol, within 
an equilateral triangle, is intended to alert the 
user to the presence of uninsulated “dangerous 
voltage” within the product’s enclosure that may 
be of sufficient magnitude to constitute a risk of 
electric shock to persons.

The exclamation point within an equilateral 
triangle is intended to alert the user to the 
presence of important operating and 
maintenance (servicing) instructions in the 
literature accompanying the appliance.

WARNING

RISK OF ELECTRIC SHOCK

DO NOT OPEN

RISQUE DE CHOC ELECTRIQUE

NE PAS OUVRIR

AVIS

 

PORTABLE CART WARNING

S3125A

SN229402408_PD-30AE_En.book  2 ページ  2016年7月28日 木曜日 午前8時16分

Summary of Contents for PD-10AE





























Reviews: