Listening to the radio
1 2 3 4
5
These are the basic steps necessary to operate
the radio. More advanced tuner operation is
explained starting on the next page.
1
Stereo (
5
) indicator
Shows when the selected frequency is
being broadcast in stereo.
2
LOC indicator
Shows when local seek tuning is on.
3
Preset number indicator
Shows which preset has been selected.
4
Band indicator
Shows which band the radio is tuned to, AM
or FM.
5
Frequency indicator
Shows the frequency to which the tuner is
tuned.
1 Press SOURCE to select the tuner.
Press
SOURCE
until you see
Tuner
displayed.
2 Press BAND to select a band.
Press
BAND
until the desired band (
FM1
,
FM2
,
FM3
for FMor
AM
) is displayed.
3 To perform manual tuning, briefly press
c
or
d
.
The frequencies move up or down step by
step.
4 To perform seek tuning, press and hold
c
or
d
for about one second and release.
The tuner will scan the frequencies until a
broadcast strong enough for good reception is
found.
#
You can cancel seek tuning by briefly pressing
c
or
d
.
#
If you press and hold
c
or
d
you can skip sta-
tions. Seek tuning starts as soon as you release
the button.
Tuner
En
14
Section
04
