English
Français
Italiano
Español
Nederlands
Deutsch
5
En
Initial Setup
Before you start
1
Loading the batteries.
WARNING
•Do not use or store batteries in direct sunlight
or other excessively hot place, such as
inside a car or near a heater. This can cause
batteries to leak, overheat, explode or catch
fire. It can also reduce the life or performance
of batteries.
CAUTION
•When disposing of used batteries, please
comply with governmental regulations or
environmental public institution’s rules that
apply in your country/area.
2
Switch on your system components and
this unit.
Start by switching on the playback component,
then this unit (press
u
/I STANDBY/ON
button
on the front panel).
/I STANDBY/ON
STANDBY
iPod/iPhone
5V
1A
DIRECT
Hi-Bit 32
Up Sampling
•The unit turns on. The button’s central power
indicator will flash slowly.
About twenty seconds after turning on the
power, the following screen appears. About
thirty seconds are required between turning
the power on and completion of startup.
Network setting
Automatic setting
1
Press SETUP.
The
Initial Setup
screen is shown on the display.
2
Select Network Setting
Network
Configuration.
Friendly Name
Network Configuration
Network Setting
3
Use
to select DHCP On, then press
ENTER.
Select
Don’t Use Proxy Server
.
DHCP Off
DHCP On
Network Configration
If your router does not support DHCP, please
manually set the network settings. Please see
the operating instructions on the enclosed CD-
ROM for more details.
