17
En
En
g
lis
h
*1 Not available when [SUB.W/SUB.W] is selected in [SP-P/O MODE] in the INITIAL settings
*2 Not available when [REAR/REAR] is selected in [SP-P/O MODE] in the INITIAL settings
*3 Not available when [OFF] is selected in [SUB.W].
SUB.W
*2
[NOR], [REV], [OFF]
Select the subwoofer phase.
SUB.W CTRL
*2*3
Cut-off frequency:
[50HZ],
[63HZ], [80HZ], [100HZ],
[125HZ], [160HZ], [200HZ]
Output level:
[–24] to [+6]
Slope level:
[–12], [–24]
Only frequencies lower than those in the
selected range are output from the
subwoofer.
BASS BOOST
[0] to [+6]
Select the bass boost level.
HPF SETTING
Cut-off frequency:
[OFF],
[50HZ], [63HZ], [80HZ],
[100HZ], [125HZ], [160HZ],
[200HZ]
Slope level:
[–12], [–24]
Only frequencies higher than the high-pass
filter (HPF) cutoff are output from the
speakers.
SLA
[+4] to [–4]
Adjust the volume level for each source
except FM.
Each of the below combinations are set to
the same setting automatically.
•
USB, iPod, PANDORA (iPhone), ANDROID,
and APP (iPhone)
•
BT AUDIO, PANDORA (Android),
ANDROID, and APP (Android)
Menu Item
Description
You can also access to these menus when the unit is turned off.
SYSTEM settings
Menu Item
Description
CLOCK SET
Set the clock (page 5).
12H/24H
[12H], [24H]
Select the time notation.
AUTO PI
[ON], [OFF]
Search for a different station with the same
programming, even if using a preset
station.
AUX
[ON], [OFF]
Set to [ON] when using an auxiliary device
connected to the unit.
USB AUTO
[ON], [OFF]
Select [ON] to automatically switch to
[USB] source when a USB device/iPod is
connected to the unit.
Select [OFF] when a USB device/iPod is
being connected to the unit just for
charging.
BT AUDIO
[ON], [OFF]
Set the Bluetooth signal on/off.
PANDORA
[ON], [OFF]
Set to [ON] when using the Pandora
function.