11
En
En
g
lis
h
First, make a Bluetooth connection with the Bluetooth telephone (page 10).
Up to two Bluetooth telephones can be connected simultaneously.
Important
•
Leaving the unit on standby to connect to your phone via Bluetooth while the engine is
not running can drain the vehicle’s battery.
•
Be sure to park your vehicle in a safe place and apply the parking brake before operation.
To make a phone call
1
Press
to display the phone menu.
When two phones are connected, a phone name appears first then a phone
menu will display. To switch to another phone, press
again.
2
Turn the
M.C.
dial to select [RECENTS] or [PHONE BOOK], then press to
confirm.
If you select [PHONE BOOK], proceed to step 4.
3
Turn the
M.C.
dial to select [MISSED], [DIALED] or [RECEIVED], then press
to confirm.
4
Turn the
M.C.
dial to select a name or phone number, then press to
confirm.
The phone call starts.
DEV. INFO
Switch the device information on the display between
the device name and Bluetooth device address.
GUEST MODE
Select [ON] to move to the [DEL DEVICE] screen
automatically when the unit has already been paired
with five devices.
[ON], [OFF]
A.PAIRING
Select [ON] to pair the unit and iPhone automatically
when an iPhone is connected to the unit via USB. (This
function may not be available depending on the version
of iOS you are using.)
[ON], [OFF]
Bluetooth telephone
Menu Item
Description
To answer an incoming call
1
Press
when a call is received.
TIP
When two phones are connected to the unit via Bluetooth and there is an incoming call
while one phone is being used for a call, a message will appear in the display. To answer that
incoming call, you need to end the existing call.
Basic operations
To preset phone numbers
1
Select a phone number from a phone book or call history.
2
Press and hold one of the number buttons (
1
/
to
6
/
).
The contact is stored in the selected preset number.
To make a call using a preset number, press one of the number buttons (
1
/
to
6
/
), then press the
M.C.
dial.
Purpose
Operation
End a call
Press
.
Reject an incoming call
Press and hold
when a call is received.
Switch between the current
caller and a caller on hold
Press the
M.C.
dial.
Cancel a caller on hold
Press and hold
.
Adjust the volume of the
caller’s voice (When private
mode is on, this function is not
available.)
Turn the
M.C.
dial during the call.
Turn the private mode on or
off
Press
BAND
/
during the call.
