Pioneer MVH-S405BT, Owner'S Manual

Page: 19 / 196

19
X:\print\Pioneer\Fy18\??\ESGS\733ES(AC2)_QRD3523(B6_Horizon)\020Chapter_EN.fm
MVH-S405BT
733ES(AC2)_QRD3523(B6_Horizon)
En
En
g
lis
h
SUBWOOFER *2
[NOR], [REV] Select the subwoofer phase.
SPEAKER LEVEL
Types of speaker: [FRONT L],
[FRONT R], [REAR L], [REAR R],
[SUBWOOFER]
Output level: [–24] to [10]
Select a speaker unit (filter) and adjust the
output level.
• Each value you have adjusted changes
when you change the [POSITION] setting
(page 19).
CROSSOVER
Select a speaker unit (filter) to adjust the
HPF or LPF cut-off frequency and the slope
for each speaker unit.
For details on the [CROSSOVER] setting, see
page 16.
POSITION
[OFF], [FRONT LEFT] (front
seat left), [FRONT RIGHT]
(front seat right), [FRONT]
(front seats), [ALL] Select a listening position to adjust the
speakers' output levels automatically and
add a delay time that corresponds to the
number and locations of occupied seats.
TIME ALGNMNT
[INITIAL], [OFF], [CUSTOM]
Select a type of speaker and
adjust the speaker distance
for further customizing in
[CUSTOM].
Types of speaker: [FRONT L],
[FRONT R], [REAR L], [REAR R],
[SUBWOOFER]
Speaker distance (cm): [350]
to [0.0]
Select or customize the time alignment
settings to reflect the distance between the
listener’s position and each speaker.
• Select [INITIAL] to initialize the setting
value.
• Select [OFF] to reset all setting values to
0.
• The [CUSTOM] setting is available when
[FRONT LEFT] or [FRONT RIGHT] is
selected in [POSITION] (page 19).
• The [CUSTOM] setting is not available
when [OFF] is selected in [SUBWOOFER]
(page 18).
Menu Item Description
*1 Not available when [SUB.W/SUB.W] is selected in [SP-P/O MODE] in the INITIAL settings
(page 6).
*2 Not available when [REAR/REAR] is selected in [SP-P/O MODE] in the INITIAL settings
(page 6).
SAVE SETTINGS
[YES], [NO] Save to later recall the following sound
settings at their current values:
[CROSSOVER], [SPEAKER LEVEL], [EQ
SETTING], [POSITION], [TIME ALGNMNT],
[D.BASS], [SUBWOOFER].
LOAD SETTINGS
Load the sound settings, when you have
already performed [SAVE SETTINGS].
D.BASS
[OFF], [LOW], [HI] Boost the bass level dynamically to offer an
effect as if a subwoofer was added to the
system.
LOUDNESS
[OFF], [LOW], [MID], [HI] Compensate for clear sound at low volume.
SLA
[+4] to [–4] Adjust the volume level for each source
except FM.
Each of the below combinations are set to
the same setting automatically.
• When making a USB connection, set USB,
iPod, PANDORA, ANDROID, SPOTIFY, and
APP.
• When making a Bluetooth connection,
set BT AUDIO, iPod, PANDORA, ANDROID,
SPOTIFY, and APP.
Menu Item Description