Pioneer MVH-S400BT Owner'S Manual Download Page 51

Page: 51 / 60

- 51 -

En
g

lis

The display automatically returns to the
normal display.

→

No operations have been made for
about 30 seconds.
– Perform an operation.

The repeat play range changes
unexpectedly.

→

Depending on the repeat play range,
the selected range may change when
another folder or track is being selected
or during fast forwarding/reversing.
– Select the repeat play range again.

A subfolder is not played back.

→

Subfolders cannot be played when
[FLD] (folder repeat) is selected.
– Select another repeat play range.

The sound is intermittent.

→

You are using a device, such as a cellular
phone, that may cause audible
interference.
– Move electrical devices that may be

causing the interference away from
the unit.

The sound from the Bluetooth audio
source is not played back.

→

There is a call in progress on a
Bluetooth-connected cellular phone.
– The sound will be played back when

the call is terminated.

→

A Bluetooth-connected cellular phone
is currently being operated.
– Stop using the cellular phone.

→

The connection between the unit and
the cellular phone is not established
correctly after a call made by a
Bluetooth-connected cellular phone.

– Make a Bluetooth connection

between the unit and the cellular
phone again.

Common

AMP ERROR

→

This unit fails to operate or the speaker
connection is incorrect.

→

The protective circuit is activated.
– Check the speaker connection.
– Turn the ignition switch OFF and back

to ON again. If the message remains,
contact your dealer or an authorized
Pioneer Service Station for assistance.

NO XXXX

(NO TITLE, for example)

→

There is no embedded text information.
– Switch the display or play another

track/file.

USB device/iPhone

FORMAT READ

→

Sometimes there is a delay between the
start of playback and when you start to
hear any sound.
– Wait until the message disappears and

you hear sound.

NO AUDIO

→

There are no songs.
– Transfer the audio files to the USB

device and connect.

→

The connected USB device has security
enabled.
– Follow the USB device instructions to

disable the security.

Additional Information

Troubleshooting

Error messages

Summary of Contents for MVH-S400BT





























































Search results

Summary of Contents for MVH-S400BT

Reviews:

Related manuals for MVH-S400BT

Brands by name

Popular brands

Pioneer MVH-S400BT, Owner'S Manual

Search results

Summary of Contents for MVH-S400BT

Reviews:

Related manuals for MVH-S400BT

Brands by name

Popular brands