9
En
En
g
lis
h
•
To cancel searching, press the
M.C.
dial.
•
If the desired device is not in the list, select [RE-SEARCH].
•
If there is no device available, [NOT FOUND] appears in the display.
•
If there is already a connected device, the phone menu appears by
pressing .
3
Turn the
M.C.
dial to select a device from the device list, then press to
confirm.
Press and hold the
M.C.
dial to switch the displayed device information
between the Bluetooth device address and device name.
If you make a Bluetooth connection from the unit, proceed to step 5.
4
Select the unit name shown in the device display.
5
Make sure the same 6-digit number appears on this unit and the device,
then select [YES] if the 6-digit numbers displayed on this unit and the
device are the same.
First, make a Bluetooth connection with the Bluetooth telephone (page 8). Up
to two Bluetooth telephones can be connected simultaneously.
Important
•
Leaving the unit on standby to connect to your phone via Bluetooth while the engine is
not running can drain the vehicle’s battery.
•
Be sure to park your vehicle in a safe place and apply the parking brake before operation.
To make a phone call
1
Press
to display the phone menu.
When two phones are connected, a phone name appears first then a phone
menu will display. To switch to another phone, press
again.
2
Turn the
M.C.
dial to select [RECENTS] or [PHONE BOOK], then press to
confirm.
If you select [PHONE BOOK], proceed to step 4.
Bluetooth telephone
3
Turn the
M.C.
dial to select [MISSED], [DIALLED] or [RECEIVED], then
press to confirm.
4
Turn the
M.C.
dial to select a name or phone number, then press to
confirm.
The phone call starts.
To answer an incoming call
1
Press any button when a call is received.
TIP
When two phones are connected to the unit via Bluetooth and there is an incoming call
while one phone is being used for a call, a message will appear in the display. To answer that
incoming call, you need to end the existing call.
Basic operations
To preset phone numbers
1
Select a phone number from a phone book or call history.
2
Press and hold one of the number buttons (
1
/
to
6
/
).
The contact is stored in the selected preset number.
Purpose
Operation
End a call
Press
.
Reject an incoming call
Press and hold
when a call is received.
Switch between the current
caller and a caller on hold
Press the
M.C.
dial.
Cancel a caller on hold
Press and hold
.
Adjust the volume of the
caller’s voice (When private
mode is on, this function is not
available.)
Turn the
M.C.
dial during the call.
Turn the private mode on or
off
Press
BAND
/
during the call.
