14
En
•
Android device via Bluetooth (page 8)
Pioneer Smart Sync on the device starts automatically.
NOTE
Regardless of whether the [AUTO APP CONN] setting is set to [ON] or [OFF],
you can also perform the following to start Pioneer Smart Sync.
•
For devices other than the USB-connected Android device, press
SRC
/
OFF
to select any source and press and hold the
M.C.
dial.
NOTES
•
When you connect a mobile device other than an Android device, it may not operate
correctly depending on your mobile device.
•
If Pioneer Smart Sync has not been installed on your Android device yet, a message that
prompts you to install the application will appear on your Android device (except for the
Android device connected via Bluetooth). Select [OFF] in [AUTO APP CONN] to clear the
message (page 18).
1
Press
SRC/OFF
to select [APP].
You can also make various adjustments in the AUDIO settings (page 15).
You can adjust the cut-off frequency value and the slope value of each speaker.
The following speakers can be adjusted.
[FRONT], [REAR], [SUBWOOFER]
NOTE
[SUBWOOFER] can only be selected when [ON] is selected in [SUBWOOFER] (page 16).
1
Press the
M.C.
dial to display the main menu.
Listening to music on your device
Audio Adjustments
Adjusting the cut-off frequency value and the
slope value
2
Turn the
M.C.
dial to select [AUDIO], then press to confirm.
3
Turn the
M.C.
dial to select [CROSSOVER], then press to confirm.
4
Turn the
M.C.
dial to select the speaker unit (filter) to be adjusted, then
press to confirm.
5
Turn the
M.C.
dial to select [HPF] or [LPF] according to the speaker unit
(filter), then press to confirm.
6
Turn the
M.C.
dial to select an appropriate cut-off frequency for the
speaker unit (filter) selected in step 4, then press to confirm.
[25HZ] to [250HZ]
7
Turn the
M.C.
dial to select an appropriate slope for the speaker unit
(filter) selected in step 4.
[–6] to [–24] (if you choose [FRONT] or [REAR])
[–6] to [–36] (if you choose [SUBWOOFER])
You can adjust various settings in the main menu.
1
Press the
M.C.
dial to display the main menu.
2
Turn the
M.C.
dial to select one of the categories below, then press to
confirm.
•
FUNCTION settings (page 15)
•
AUDIO settings (page 15)
•
SYSTEM settings (page 17)
•
ILLUMINATION settings (page 18)
•
MIXTRAX settings (page 18)
3
Turn the
M.C.
dial to select the options, then press to confirm.
Settings