Pioneer MVH-AV189, Owner'S Manual

Page: 19 / 32

19
Changing the wide screen
mode
You can set the screen size for the video and JPEG/BMP images.
p
The default setting is “ Full ”, and for JPEG/BMP images is
“ Normal ”.
p
When there are touch panel keys on the screen, images are
displayed with the “ Full ” mode regardless of your setting.
1 Touch the following key.
p
The appearance of this key changes according to the current
setting.
2 Touch the desired mode.

Full :
A 4:3 picture is enlarged in the horizontal direction only,
enabling you to enjoy an image without any omissions.
 Zoom :
A 4:3 picture is enlarged in the same proportion both verti-
cally and horizontally.

Normal :
A 4:3 picture is displayed normally, without changing its
proportion.
p
You cannot operate this function while driving.
p
Different settings can be stored for each video source.
p
When a video is viewed in a wide screen mode that does not
match its original aspect ratio, it may appear different.
p
The video image will appear coarser when viewed in “ Zoom ”
mode.
Setting the video signal for the
rear view camera
When you connect a rear view camera to this product, select the
suitable video signal setting.
p
You can operate this function only for the video signal input
into the AV input.
1 Display the “ Video Setup ” screen.
2 Touch [ Video Signal Setting ].
3 Touch [ Camera ].
The pop-up menu appears.
4 Touch the item you want to set.

Auto (default): Adjusts the video signal setting
automatically.

PAL : Sets the video signal to PAL.

NTSC
: Sets the video signal to NTSC.

PAL-M : Sets the video signal to PAL-M.

PAL-N
: Sets the video signal to PAL-N.

SECAM : Sets the video signal to SECAM.
Resetting various settings/
Restoring this product to the
default settings
You can restore settings or recorded content to the default
settings. Various methods are used to clear user data.
Method 1: Remove the vehicle battery
Resets various settings registered to this product.
p
The settings configured on the “ Theme ” screen are not
reset.
Method 2: Initialise from the “System” menu
Method 3: Press the RESET button
 Resetting the microprocessor on page 4
Restoring the default settings
p
This setting is available only when you stop your vehicle in a
safe place and apply the handbrake.
CAUTION
Do not turn off the engine while restoring the settings.
1 Display the “ System ” setting screen.
2 Touch [ Restore Settings ].
A message confirming whether to initialise the settings appears.
3 Touch [ Restore ].
p
The source is turned off before the process starts.
Other functions
AUX
48 21
Full
6/10
2
1
1
Clock display
Displays the time and date setting screen
 Setting the time and date on page 18
2
Screen display mode key
Changes the wide screen mode
 Changing the wide screen mode on page 19
Setting the time and date
1 Touch the current time on the screen.
2 Touch or
to set the correct time and
date.
You can operate the following items: Year, month, date, hour,
minute.
p
You can change the time display format to “
12hour
” (default)
or “ 24hour ”.
p
You can change the order of date display format: Day-month-
year, Month-day-year.
Common operations
19 < QRB3574-A >
Common
operations
Common
operations
Other functions