Pioneer MVH-A210BT, Installation Manual

Page: 5 / 48

5
En
En
g
lis
h
Rear view camera (ND-BC8) (sold
separately)
To video output
RCA cable (supplied with ND-BC8)
This product
Rear view camera input (
R.C IN )
Power supply
Power cord
Violet/white (
REVERSE-GEAR SIGNAL
INPUT )
Refer to Power cord on page 3.
NOTES
• For mounting the camera, follow the
instructions for mounting the camera.
Use a camera whose power lead is
connected to the ACC switch.
• Connect only the rear view camera to R.C
IN . Do not connect any other equipment.
• Some appropriate settings are required
to use rear view cameras. For details, refer
to the Operation Manual.
Rear display with RCA input jacks
To video input
RCA cables (sold separately)
This product
Video output (
V OUT )
AUX input
Mini-jack AV cable (sold separately)
Yellow
Red, white
To Yellow
To Red, white
To video output
To audio outputs
External video component (sold
separately)
External video component
and the display
NOTE
The appropriate setting is required to use
the external video component. For details,
refer to the Operation Manual.
WARNING
NEVER install the rear display in a
location that enables the driver to watch
the video source while driving.
This product’s rear video output is for
connection of a display to enable
passengers in the rear seats to watch the
video source.
CAUTION
Be sure to use a mini-jack AV cable (sold
separately) for wiring. If you use other
cables, the wiring position might differ
resulting in disturbed images and sounds.
This product
AUX input
Mini-jack AV cable (sold separately)
Dynamic mic (sold separately)
Karaoke connection
L : Left audio (White)
R : Right audio (Red)
V : Video (Yellow)
G : Earth