Pioneer MJ-D508, Service Manual, Page: 42 / 72

MJ-D508
42
Operation Keys FL Display Contents
REC (
¶
)
PLAY (
3
)
STOP (
7
)
JOG (
4
,
¢
) Same operation as in normal mode
CUE (
¡
)
REV (
1
)
INPUT SELECTOR
EJECT (
0
) Disc ejection (no TOC writing)
DIGITAL-NR
D S P O K ! !
Normal DSP IC operation
D S P E R R O R 1
Communication between the DSP IC and the system controller is not
possible.
D S P E R R O R 2
Calculation in the DSP IC not correct
6.2 TEST MODE
There are two test modes: test mode 1 for main unit operation check
and test mode 2 for MD mechanism assy adjustment and check.
6.2.1 Test Mode 1 (main unit operation check)
How to enter into test mode 1
1) Hold the “ENTER” key and the “STOP” key depressed and press the POWER switch.
2) SYSTEM TEST will be displayed on the FL display.
Operation check for the operation keys
Operation check for other keys
Operation Keys FL Display
OFF
S Y S T E M T E S T
TIMER SW REC Entire FL lit
PLAY Entire FL not lit
DAC MODE
D A C
NAME CLIP
N A M E C L I P
DISPLAY/CHARA
D I S P
A–B
When each key is pressed, display according to the following table shall be made on the FL display.
Operation Keys FL Display
JOG (Push)
E N T E R
EDIT/NO
E D I T / N O
NAME
N A M E
SYNCHRO REC
S Y N C H R O R E C
Cancellation of Test Mode 1
Press the POWER switch.