Pioneer KEX-M9086ZT-91/UC, Service Manual

Page: 23 / 30

38
KEX-M9086ZT,M9086ZT-91
Normal
mode
System Check mode
The system runs a self-diagnosis and displays the results (diagnostic codes). •Max. 6 Diagnostic codes for each physical address (for
each connected device)
•Displays the current status (past errors not displayed)
Diagnosis Memory mode
The system displays historical operational er
rors
recorded for each physical addr
ess (for each device)
during normal operation in the past. •Max. 6 Diagnostic codes for each physical address (for
each connected device)
LAN CHECK mode
The system displays the physical addr
ess of each
device connected to A
VC-LAN.
•The device's own physical address is included.
Diagnosis Memory Clear
The system clears Diagnosis Memory (the codes). •After completing clearing, the
system goes to LAN CHECK mode.
6
Memory Clear
Complete clearing (automatic)
2
End Diagnosis
3
Go to System Check
4
Return to LAN CHECK
5
Go to Diagnosis Memory
4
Return to LAN CHECK
2
End Diagnosis
1
Go to Diagnosis
2
End Diagnosis
-
Flowchart and Functions
-
Operation Specifications
Integrated Panel
(by Sumitomo Electric)
1
Go to Diagnosis
Press the CD key three times, while holding down CH1 or CH6.
2
End Diagnosis
CD key (Press and hold for 1.7 seconds.) ACC OFF/ON
3
Go to System Check
CH1
4
Return to LAN CHECK
CH8
5
Go to Diagnosis Memory
CH2
6
Memory Clear
CH5 (Press and hold for 1.7 seconds.)
•Page up
TUNE +
•Page down
TUNE -
7.2 DIAGNOSIS
7.2.1 DIAGNOSIS MODE