08
Section
Setting the time display on or off
You can turn the time display on even when the
sources are off.
Press
CLOCK
to select the time display.
Each press of
CLOCK
turns time display on or
off.
• The time display disappears temporarily when
you perform other operations, but the time indi-
cation is displayed again after 25 seconds.
Using the AUX source
An IP-BUS-RCA Interconnector such as the
CD-RB20 or CD-RB10 (sold separately) lets you
connect this unit to auxiliary equipment featur-
ing RCA output. For more details, refer to the
IP-BUS-RCA Interconnector owner‘s manual.
Selecting AUX as the source
Press
SOURCE
to select
AUX
as the source.
Press
SOURCE
until
AUX
appears in the display.
• If the auxiliary setting is not switched on,
AUX
cannot be selected. For more details, see
Switching the auxiliary setting
on page 30.
Setting the AUX title
The title displayed for the
AUX
source can be
changed.
1 After you have selected
AUX
as the source,
press
FUNCTION
and hold until
TITLE IN
appears in the display.
2 Press
5
or
∞
to select a letter of the alpha-
bet.
Each press of
5
will display a letter of the alpha-
bet in
A B C ... X Y Z
, numbers and symbols in
1 2
3 ... @ # <
order. Each press of
∞
will display a
letter in the reverse order, such as
Z Y X ... C B A
order.
3 Press
3
to move the cursor to the next
character position.
When the letter you want is displayed, press
3
to move the cursor to the next position and then
select the next letter. Press
2
to move back-
wards in the display.
4 Move the cursor to the last position by
pressing
3
after entering the title.
When you press
3
one more time, the entered
title is stored in memory.
5 Press
BAND/ESC
to return to the playback
display.
En
32
Other Functions
