Pioneer KEH-P424, Service Manual

Page: 47 / 50

47
KEH-P424,P4700,P4750
Disc Number Search (for 6-Disc, 12-Disc types)
•
You can select discs directly with the 1 to 6 buttons. Just press the number corresponding to the disc you want to listen to.
Note:
•
When a 12-Disc Multi-CD Player is connected and you want to select disc 7 to 12, press the 1 to 6 buttons for 2 seconds or longer.
Disc Number Rough Search (for 50-Disc type only)
This handy function lets you select discs loaded in a 50-Disc Multi-CD Player using the 1 to 5 buttons. The 50 discs are divided into five blocks, with each of the 1 to 5 buttons assigned to a block.
•
Select the desired block with the 1 to 5 buttons.
Note:
•
After completing a rough search, use the
5
and
∞
buttons to select a desired disc.
Switching between Displays
•
Each time you press the DISPLAY button, the display switches between Disc Title and Group indications for the disc currently playing.
Playback mode (Elapsed play time)
=
Disc Title
=
Music Group
Note:
•
Music Group display is a 50-Disc type Multi-CD player function. You cannot switch to this dis- play with 6-Disc and 12-Disc type Multi-CD players.
•
If you switch displays when disc titles have not been input or when discs have not been allocated to a music group, “NO TITLE” or “NO GROUP” is displayed for about 8 seconds.
Note:
•
The multi-CD player may perform a preparatory operation, such as verifying the presence of a disc or reading disc information, when the power is turned ON or a new disc is selected for play- back. “READY” is displayed.
•
When a magazine is loaded into a 50-Disc type Multi-CD Player, information on all the discs in the magazine is read. If you start playing a disc on a 50-Disc type Multi-CD Player before reading of information on all discs has been completed, reading of information stops part way through. This will prevent you from using a number of functions. (If you try and use these functions, “NOT READY” is displayed.) If this happens, reading of information begins again when you switch to a component other than the 50-Disc type Multi-CD Player.
•
If the multi-CD player cannot operate properly, an error message such as “ERROR-14” is dis- played. Refer to the multi-CD player owner’s manual.
•
If there are no discs in the multi-CD player magazine, “NO DISC” is displayed.
•
“LOAD” will be displayed in the following cases: *
If the disc in the extra tray in selected.
*
If the disc in moved from the extra tray to the magazine. (Refer to the 50-Disc type multi-CD player owner’s manual.)
Basic Operation of Multi-CD Player
Basic Operation
Track Search and Fast forward/Reverse
•
You can select between Track Search or Fast forward/Reverse by pressing the
2
/
3
button
for a different length of time.
Track Search
0.5 seconds or less
Fast forward/Reverse
Continue pressing
Ejecting a Single Disc (for 50-Disc type only)
•
Press the
`
button for 2 seconds or more, and you can eject the currently
playing disc from the extra tray.
(Refer to the operation manual for the 50-Disc type Multi-CD player for details concern- ing disc ejection from the extra tray.) Note:
•
This function does not operate if a disc is already loaded in the extra tray.
Elapsed Play Time Indicator
Disc Search
Disc Number Indicator
Track Number Indicator
Switching the Multi-CD Player
Using a multiple connection adapter lets you connect up to three Multi-CD players. M-CD 1
=
M-CD 2
=
M-CD 3
(Displayed for about 2 seconds.) This product can control one or more multi-CD players. (There are some types of Multi- CD players such as CDX-P630S, which you cannot connect more than one.)