background image

Additional information

6

6

41

2

34

4

However, parties who have received copies, or rights, from you 

under this License will not have their licenses terminated so long as 

such parties remain in full compliance.

5. You are not required to accept this License, since you have not 

signed it. However, nothing else grants you permission to modify or 

distribute the Program or its derivative works. These actions are 

prohibited by law if you do not accept this License. Therefore, by 

modifying or distributing the Program (or any work based on the 

Program), you indicate your acceptance of this License to do so, and 

all its terms and conditions for copying, distributing or modifying the 

Program or works based on it.

6. Each time you redistribute the Program (or any work based on the 

Program), the recipient automatically receives a license from the 

original licensor to copy, distribute or modify the Program subject to 

these terms and conditions. You may not impose any further 

restrictions on the recipients' exercise of the rights granted 

herein.You are not responsible for enforcing compliance by third 

parties to this License.

7. If, as a consequence of a court judgment or allegation of patent 

infringement or for any other reason (not limited to patent issues), 

conditions are imposed on you (whether by court order, agreement 

or otherwise) that contradict the conditions of this License, they do 

not excuse you from the conditions of this License. If you cannot 

distribute so as to satisfy simultaneously your obligations under this

License and any other pertinent obligations, then as a consequence 

you may not distribute the Program at all. For example, if a patent 

license would not permit royalty-free redistribution of the Program by 

all those who receive copies directly or indirectly through you, then 

the only way you could satisfy both it and this License would be to 

refrain entirely from distribution of the Program.

If any portion of this section is held invalid or unenforceable under 

any particular circumstance, the balance of the section is intended 

to apply and the section as a whole is intended to apply in other 

circumstances.

It is not the purpose of this section to induce you to infringe any 

patents or other property right claims or to contest validity of any 

such claims; this section has the sole purpose of protecting the 

integrity of the free software distribution system, which is 

implemented by public license practices. Many people have made 

generous contributions to the wide range of software distributed 

through that system in reliance on consistent application of that 

system; it is up to the author/donor to decide if he or she is willing to 

distribute software through any other system and a licensee cannot 

impose that choice.

This section is intended to make thoroughly clear what is believed to 

be a consequence of the rest of this License.

8. If the distribution and/or use of the Program is restricted in certain 

countries either by patents or by copyrighted interfaces, the original 

copyright holder who places the Program under this License may 

add an explicit geographical distribution limitation excluding those 

countries, so that distribution is permitted only in or among countries 

not thus excluded. In such case, this License incorporates the 

limitation as if written in the body of this License.

9. The Free Software Foundation may publish revised and/or new 

versions of the General Public License from time to time. Such new 

versions will be similar in spirit to the present version, but may differ 

in detail to address new problems or concerns.

Each version is given a distinguishing version number. If the 

Program specifies a version number of this License which applies to 

it and "any later version", you have the option of following the terms 

and conditions either of that version or of any later version published 

by the Free Software Foundation. If the Program does not specify a 

version number of this License, you may choose any version ever 

published by the Free Software Foundation.

10. If you wish to incorporate parts of the Program into other free 

programs whose distribution conditions are different, write to the 

author to ask for permission. For software which is copyrighted by 

the Free Software Foundation, write to the Free Software 

Foundation; we sometimes make exceptions for this. Our decision 

will be guided by the two goals of preserving the free status of all 

derivatives of our free software and of promoting the sharing and 

reuse of software generally.

NO WARRANTY

11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, 

THERE IS NO WARRANTY FOR THE PROGRAM, TO THE 

EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN 

OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS 

AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" 

WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR 

IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A 

PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE 

QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH 

YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU 

ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR 

OR CORRECTION.

12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR 

AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR 

ANY OTHER PARTY WHO MAY MODIFY AND/OR 

REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE 

LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, 

SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES 

ARISING OUT OF THE USE OR INABILITY TO USE THE 

PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA 

OR DATA BEING RENDERED INACCURATE OR LOSSES 

SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF 

THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), 

EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN 

ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

END OF TERMS AND CONDITIONS

How to Apply These Terms to Your New Programs

If you develop a new program, and you want it to be of the greatest 

possible use to the public, the best way to achieve this is to make it free 

software which everyone can redistribute and change under these 

terms

To do so, attach the following notices to the program. It is safest to 

attach them to the start of each source file to most effectively convey the 

exclusion of warranty; and each file should have at least the "copyright" 

line and a pointer to where the full notice is found.

<one line to give the program's name and a brief idea of what it 

does.>

Copyright (C) <year> <name of author>

This program is free software; you can redistribute it and/or modify it 

under the terms of the GNU General Public License as published by 

the Free Software Foundation; either version 2 of the License, or (at 

your option) any later version.

This program is distributed in the hope that it will be useful, but 

WITHOUT ANY WARRANTY; without even the implied warranty of 

MERCHANTABILITY or FITNESS FOR A PARTICULAR 

PURPOSE. See the GNU General Public License for more details.

You should have received a copy of the GNU General Public 

License along with this program; if not, write to the Free Software 

Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-

1301 USA.

Also add information on how to contact you by electronic and paper 

mail.

If the program is interactive, make it output a short notice like this when 

it starts in an interactive mode:

Gnomovision version 69, Copyright (C) year name of author

Gnomovision comes with ABSOLUTELY NO WARRANTY; for 

details type `show w'.

This is free software, and you are welcome to redistribute it under 

certain conditions; type `show c' for details.

The hypothetical commands `show w' and `show c' should show the 

appropriate parts of the General Public License. Of course, the 

commands you use may be called something other than `show w' and 

`show c'; they could even be mouse-clicks or menu items--whatever 

suits your program.

You should also get your employer (if you work as a programmer) or 

your school, if any, to sign a "copyright disclaimer" for the program, if 

necessary. Here is a sample; alter the names:

Yoyodyne, Inc., hereby disclaims all copyright interest in the 

program `Gnomovision' (which makes passes at compilers) written 

by James Hacker.

<signature of Ty Coon>, 1 April 1989

Ty Coon, President of Vice

This General Public License does not permit incorporating your program 

into proprietary programs. If your program is a subroutine library, you 

may consider it more useful to permit linking proprietary applications 

with the library. If this is what you want to do, use the GNU Lesser 

General Public License instead of this License.

EOF

HTP-074_En.book  41 ページ  2016年4月25日 月曜日 午前10時12分

Summary of Contents for HTP-075











































Reviews: