5
5
29
2
34
4
Home Menu
Using the Home Menu
The following section shows you how to make detailed
settings to specify how you’re using the receiver, and also
explains how to fine-tune individual speaker system settings
to your liking.
Important
•
The OSD will not appear if you have connected using the
composite output to your TV. Use HDMI connections for
Home Menu.
•
If headphones are connected to the receiver, disconnect
them.
•
You can’t use the Home Menu when the
USB
input is
selected.
1
Switch on the receiver and your TV.
Press
Í
RECEIVER
to switch on.
2
Switch the TV input to the input that connects this
receiver to the TV through the corresponding HDMI
cable.
3
Press
HOME MENU
.
The Home Menu appears on your TV. Use
/ /
/
and
ENTER
on the remote control to navigate through
the screens and select menu items. Press
RETURN
to
exit the current menu.
•
Press
HOME MENU
at any time to exit the Home
Menu.
4
Select the setting you want to adjust.
•
Manual SP Setup
-
Speaker Setting
– Specify the size and number of
speakers you’ve connected (see below).
-
X.Over
– Specify which frequencies will be sent to the
subwoofer (
page 30
).
-
Channel Level
– Adjust the overall balance of your
speaker system (
page 30
).
-
Speaker Distance
– Specify the distance of your
speakers from the listening position (
page 31
).
•
Input Assign
– Specify what you’ve connected to the
(CD)
audio input (see
The Input Assign menu
on page 31
).
•
Auto Power Down
– Sets to automatically turn off the
power when the receiver has not operated for several
hours (see
The Auto Power Down menu
on page 32
).
•
HDMI Setup
– Set the audio return channel function and
set the HDMI input signal to Standby Through output or
not during standby (see
The HDMI Setup menu
on
page 32
).
Manual speaker setup
This receiver allows you to make detailed settings to optimize
the surround sound performance. You only need to make
these settings once (unless you change the placement of
your current speaker system or add new speakers).
Speaker Setting
Use this setting to specify your speaker configuration (size,
number of speakers).
1
Select ‘Manual SP Setup’ from the Home Menu.
2
Select ‘Speaker Setting’ from the Manual SP Setup
menu.
3
Choose the set of speakers that you want to set then
select a speaker size.
Use
/
to select the size (and number) of each of the
following speakers:
•
Front
– Select
LARGE
if your front speakers reproduce
bass frequencies effectively, or if you didn’t connect a
subwoofer. Select
SMALL
to send the bass frequencies to
the subwoofer.
•
Center
– Select
LARGE
if your center speaker
reproduces bass frequencies effectively, or select
SMALL
to send bass frequencies to the other speakers or
subwoofer. If you didn’t connect a center speaker, choose
NO
(the center channel is sent to the other speakers).
•
Surr
– Select
LARGE
if your surround speakers
reproduce bass frequencies effectively. Select
SMALL
to
send bass frequencies to the other speakers or
subwoofer. If you didn’t connect surround speakers
choose
NO
(the sound of the surround channels is sent to
the other speakers).
RECEIVER
RECEIVER
RECEIVER
RECEIVER
AUDIO SEL
AUDIO SEL
AUDIO SEL
AUDIO SEL
SAT
SAT
STREAM BOX
STREAM BOX
DVD
DVD
AV
AV
ADJUST
ADJUST
MUTE
MUTE
HOME
HOME
MENU
MENU
HOME
MENU
HOME
MENU
RETURN
RETURN
RETURN
RETURN
VOLUME
VOLUME
VOLUME
VOLUME
H o m e M e nu
1.Manual SP Setup
2.Input Assign
3.Auto Power Down
4.HDMI Setup
R e t u r n
1.Manual SP Setup
Return
a.Speaker Setting
b.X.Over
c.Channel Level
d.Speaker Distance
1a.Speaker Setting
Front
Center
Surr
Subwoofer:
Return
[ NO ]
[ NO ]
YES
SMALL
HTP-074_En.book 29 ページ ２０１６年４月２５日 月曜日 午前１０時１２分
