Pioneer GM-X722 X1R/ES, Service Manual

Page: 27 / 28

27
GM-X822,X722
Power source .............................................................................................................. 14.4 V DC (10.8 — 15.1 V allowable)
Grounding system ............................................................................................................................................ Negative type
Current consumption ........................................................................................................ 22.5 A (at continuous power, 4
Ω
)
Average current drawn* ............................................................................................................ 6.5 A (4
Ω
for two channels)
11.3 A (4
Ω
for one channel)
Fuse ............................................................................................................................................................................ 20 A
×
2
Dimensions ........................................................................................................................ 255 (W)
×
61 (H)
×
260 (D) mm
[10 (W)
×
2-3/8 (H)
×
10-1/4 (D) in.]
Weight ........................................................................................................ 3.4 kg (7.5 lbs.) (Leads for wiring not included)
Maximum power output ........................................................................................................ 160 W
×
2 / 480 W
×
1 (EIAJ)
Continuous power output ............................................................ 80 W
×
2 (at 14.4V, 4
Ω
, 20 — 20,000 Hz, 0.04% THD)
240 W
×
1 (at 14.4V, 4
Ω
, 20 — 20,000 Hz, 0.4% THD)
120 W
×
2 (at 14.4V, 2
Ω
, 20 — 20,000 Hz, 0.4% THD)
Load impedance ............................................................................................................................ 4
Ω
(1 — 8
Ω
allowable)
(Bridge connection: 2 — 8
Ω
allowable)
Frequency response ............................................................................................................ 10 — 50,000 Hz (+0 dB, –1 dB)
Signal-to-noise ratio ...................................................................................................................... 102 dB (IHF–A network)
Distortion ............................................................................................................................................ 0.004% (10 W, 1 kHz)
Separation ........................................................................................................................................................ 70 dB (1 kHz)
Low pass filter .................................................................................................................... Cut off frequency: 50 — 120 Hz
Cut off slope: –12 dB/oct
High pass filter .................................................................................................................. Cut off frequency: 50 — 120 Hz
Cut off slope: –12 dB/oct
Bass boost (GM-X822) .................................................................................................................. Frequency: 40 — 120 Hz
Gain: 0 — 12 dB
Bass boost (GM-X722) .............................................................................................................................. Frequency: 60 Hz
Gain: 0 — 12 dB
Input level / impedance .......................................................................................................................... 0.4 — 6.5 V/22 k
Ω
Note:
• Specifications and the design are subject to possible modification without notice
due to improvements.
*Average current drawn
• The average current drawn is nearly the maximum current drawn by this unit
when an audio signal is input. Use this value when working out total current
drawn by multiple power amplifiers.
SPECIFICATIONS