Pioneer GM-D8500M, Owner'S Manual

Page: 8 / 88

!
Install and route the separately sold battery
wire as far as possible from the speaker wires.
Install and route the separately sold battery
wire, ground wire, speaker wires and the am-
plifier as far away as possible from the anten-
na, antenna cable and tuner.
Connecting the speakers
Connect the speaker leads to suit the mode
according to the figures shown below.
One-channel output
1
Subwoofer
Connections when using
the speaker input wire
Connect the car stereo speaker output wires
to the amplifier using the supplied speaker
input wire with RCA pin cord.
1
Car Stereo
2
Speaker output
3
Red: Right
+
4
Black: Right
*
5
Black: Left
*
6
White: Left
+
7
Speaker input wire with RCA pin cord
To the RCA input jack of this unit
Note
!
If speaker wires with an RCA pin cord from a
headunit are connected to this amplifier, the
amplifier will automatically turn on when the
headunit is turned on. When the headunit is
turned off, the amplifier turns off automati-
cally. This function may not work with some
headunits. In such cases, please use a sys-
tem remote control wire (sold separately). If
multiple amplifiers are to be connected to-
gether synchronously, connect the head unit
and all amplifiers via the system remote con-
trol wire.
!
Connect the system remote control wire when
you wish to only turn on the car stereo, not the
amplifier.
Connecting the units
En
8
Section
03