If only one input plug is used, e.g. when the
car stereo has only one output (RCA output),
connect the plug to RCA input jack A rather
than B.
Two-channel output (Stereo) / (Mono)
!
Slide
INPUT SELECT
(input select) switch
to
2CH
position.
2
3
1
1
RCA input jack A
For two-channel output, connect the RCA
plugs to the RCA input jack A.
2
Connecting wire with RCA pin plugs (sold se-
parately)
3
From car stereo (RCA output)
Connections when using
the speaker input wire
Connect the car stereo speaker output wires
to the amplifier using the supplied speaker
input wire.
!
Do not connect both the RCA input and the
speaker input at the same time.
1
Car Stereo
2
Speaker output
3
White/black: CH A, Left
*
4
White: CH A, Left
+
5
Gray/black: CH A, Right
*
6
Gray: CH A, Right
+
7
Green/black: CH B, Left
*
8
Green: CH B, Left
+
9
Violet/black: CH B, Right
*
a
Violet: CH B, Right
+
b
Speaker input connector
To speaker input terminal of this unit.
Note
If speaker input wires from a headunit are con-
nected to this amplifier, the amplifier will automa-
tically turn on when the headunit is turned on.
When the headunit is turned off, the amplifier
turns off automatically. This function may not
work with some headunits. In such cases, make
sure that the CH A Left channel is connected cor-
rectly. If the function still does not work, please
use a system remote control wire (sold sepa-
rately). If multiple amplifiers are to be connected
together synchronously, connect the head unit
and all amplifiers via the system remote control
wire.
En
Connecting the units
5707000011280S <12>
