background image

Thank you for purchasing this PIONEER
product. It is designed to give you many
years of enjoyment.
PIONEER SUGGESTS USING A PRO-
FESSIONAL INSTALLER DUE TO THE
COMPLEXITY OF THIS PRODUCT.
Please read all instructions and 

WARN-

INGS

in this manual before attempting

operation. Should you have any questions,
contact your nearest Pioneer authorized
dealer or installation specialist.

Information to User

Alteration or modifications carried out
without appropriate authorization may
invalidate the user’s right to operate the
equipment.

Important

The serial number of this amplifier is writ-
ten on the bottom of the unit. For your 
own security and convenience, write it
down on the enclosed warranty card. Keep
the card handy for future reference.

Product registration

Visit us at the following site:

1 Register your product. We will keep the details of

your purchase on file to help you refer to this
information in the event of an insurance claim
such as loss or theft.

2 Receive updates on the latest products and tech-

nologies.

3 Download owner’s manuals, order product cata-

logues, research new products, and much more.

Before Using This Product

After-sales service for Pioneer
products

Please contact the dealer or distributor from where
you purchased the product for its after-sales ser-
vice (including warranty conditions) or any other
information. In case the necessary information is
not available, please contact the companies listed
below:
Please do not ship your product to the companies
at the addresses listed below for repair without
advance contact.

7

U.S.A.

Pioneer Electronics (USA) Inc.
CUSTOMER SUPPORT DIVISION
P.O. Box 1760
Long Beach, CA 90801-1760
800-421-1404

7

CANADA

Pioneer Electronics of Canada, Inc.
CUSTOMER SATISFACTION
DEPARTMENT
300 Allstate Parkway
Markham, Ontario L3R OP2
1-877-283-5901

For warranty information please see the Limited
Warranty sheet included with your product.

Summary of Contents for GM-6200F














Reviews: