Power source .............................................................................................................. 14.4 V DC (10.8 — 15.1 V allowable)
Grounding system ............................................................................................................................................ Negative type
Current consumption ...................................................................................................... 35.0 A (at continuous power, 4
Ω
)
Average current drawn* .......................................................................................................... 9.0 A (4
Ω
for four channels)
15.0 A (4
Ω
for two channels)
Fuse .......................................................................................................................................................................... 25 A
×
2
Dimensions ........................................................................................................................ 300 (W)
×
61 (H)
×
336 (D) mm
[12 in. (W)
×
2-3/8 in. (H)
×
1 ft. 1 in. (D)]
Weight ........................................................................................................ 3.9 kg (8.6 lbs.) (Leads for wiring not included)
Maximum power output .............................................................................................. 120 W
×
4 ( 4
Ω
) / 300 W
×
2 ( 4
Ω
)
Continuous power output ............................................................ 60 W
×
4 (at 14.4 V, 4
Ω
, 20 Hz — 20 kHz 0.2% THD)
150 W
×
2 (at 14.4 V, 4
Ω
, 20 Hz — 20 kHz 0.8% THD)
75 W
×
4 (at 14.4 V, 2
Ω
, 20 Hz — 20 kHz 0.8% THD)
Load impedance ............................................................................................................................ 4
Ω
(2 — 8
Ω
allowable)
(Bridge connection: 4 — 8
Ω
allowable)
Frequency response .......................................................................................................... 10 Hz — 50 kHz (+0 dB, –1 dB)
Signal-to-noise ratio ........................................................................................................................ 95 dB (IHF-A network)
Distortion ............................................................................................................................................ 0.01 % (10 W, 1 kHz)
Separation ........................................................................................................................................................ 70 dB (1 kHz)
Low pass filter ................................................................................................................................ Cut off frequency: 80 Hz
Cut off slope: –12 dB/oct
High pass filter ................................................................................................................................ Cut off frequency: 80 Hz
Cut off slope: –12 dB/oct
Gain control ...................................................................................................................................... RCA: 400 mV — 6.5 V
Speaker: 1.6 — 26 V
Maximum input level / impedance ........................................................................................................ RCA: 6.5 V / 22 k
Ω
Speaker: 26 V / 40 k
Ω
Power output ........................................................................................ 60 W RMS
×
4 channels
(4
Ω
and 1
%
THD+N)
150 W RMS
×
2 channels
(4
Ω
and 1
%
THD+N)
75 W RMS
×
4 channels
(2
Ω
and 1
%
THD+N)
Signal-to-noise ratio ............................................................ 80 dBA (Reference: 1 W into 4
Ω
)
Note:
• Specifications and the design are subject to possible modification without notice
due to improvements.
*Average current drawn
• The average current drawn is nearly the maximum current drawn by this unit
when an audio signal is input. Use this value when working out total current
drawn by multiple power amplifiers.
Specifications
<ENGLISH>
Summary of Contents for GM-6200F
Page 13: ......
