Pioneer FX-MG9327ZT/EW Service Manual Download Page 99

Page: 99 / 128

FX-MG9727ZT/UC

Mode

1,2

MREV2TO

MSPDERR

MFWDTO

MREVTO

MODERCNT

MREV2TO

MFWDTO

MREVTO

MODERCNT

MREV2TO

MFWDTO

MREVTO

MOVERCNT

MLSWNG

MREV2TO

MLSW2NG

BACKUP_NG

MLSWNG

BACKUP_NG

MREVTO

MREV2TO

BACKUP_NG

MFWDTO

MREVTO

MCHTERR

MLSWNG

MFWD2TO

MREV2TO

MLSW2NG

MOVERCNT

New test mode

Overrun error during CAMRST operation

The CAM SW value (3 bits) before operation

The ELV stop position before operation (*5)

The claws do not close during DSKFREE operation.

The claws do not open during DSKLOCK operation.

The claws do not close during CLWCLSE operation.

The claws do not open during CLWOPEN operation.

The CAM SW value (3 bits) with the claw error

The CLAW SW values before and after the error stop (2 bits each)

ELV motor FWD time-out error during DISCSEL operation

ELV motor REV time-out error during DISCSEL operation

Over-count error during DISCSEL operation

Overrun error during DISCSEL DISC operation

The target disc No.

The ELV error stop position before retry (*5)

ELV motor FWD time-out error during LIFT UP operation

ELV motor REV time-out error during LIFT UP operation

Over-count error during LIFT UP operation

Overrun error during LIFT UP operation

ELV motor FWD time-out error during LIFT DN operation

ELV motor REV time-out error during LIFT DN operation

Over-count error during LIFT DN operation

DISC IN (SIDE SW ON) is sensed during door close operation.

Overrun error during LIFT DN operation

"Pinched disc" is sensed during LIFT DN operation (within the range of +/-1LSB, 200ms continued)

Current disc No.

The ELV error stop position before retry (*5)

CAMRST Forced ejection Door open/close error

LOAD SW error during HLFLOAD operation

LOAD SW error during SEJPCK operation

LOAD SW error during DINSRDY operation

Backup NG during EJCTON operation

MREVTO error during EJCTON operation

MREV2TO error during EJCTON operation

Backup NG during WTLOAD operation

MFWDTO time-out error during WTLOAD operation

SIDE SW ON with OK SW ON waiting retry during WTLOAD operation

Incomplete insertion error during WTLOAD operation

OK SW ON but PHOTO ON during WTLOAD operation

MFWD2TO time-out error during WTLOAD operation

OK SW ON waiting retry (3 times) during WTLOAD operation

SIDE SW ON at the OK SW ON waiting mode during WTLOAD operation

The LOAD SW has not been determined during insertion/loading operation (Chatter remains.)

The LOAD SW value (3 bits) at the FEJCHK end

The ELV stop position at the FEJCHK end (*5)

Focus NG after servo close

Lock NG after servo close

Sub code NG after servo close

Not applicable to the G2 mechanism.

The claw SW value at the occurrence of error

The rotation rate does not satisfy the spec.

ERROR 3

ERROR 1

Digit Code

Name

Descriptions

AVC-LAN

error code

New test mode

Claw Err

DISCSEL Err

LIFT Err (*2)

error ERROR 3

Summary of Contents for FX-MG9327ZT/EW

































































































































Search results

Summary of Contents for FX-MG9327ZT/EW

Reviews:

Related manuals for FX-MG9327ZT/EW

Brands by name

Popular brands

Pioneer FX-MG9327ZT/EW, Service Manual

Search results

Summary of Contents for FX-MG9327ZT/EW

Reviews:

Related manuals for FX-MG9327ZT/EW

Brands by name

Popular brands