Pioneer Elite VSX-70, Service Manual

Page: 38 / 137

38
VSX-1128-K
1 2 3 4
A
B
C
D
E
F
1 2 3 4
6.2 DEFAULT SETTINGS
Default system settings Default input settings
Resetting the system
0 dB
0 dB
0 dB
0 dB
0 dB
0 dB
0 dB
0 dB
0 dB
0 dB
0 dB
0 dB
0 dB
0 dB
0 dB
0 dB
0 dB
Use this procedure to reset all the receiver’s settings to the factory
default. Use the front panel controls to do this.
Set MULTI-ZONE to MULTI ZONE OFF.
• Disconnect the iPod and USB memory device from the receiver
beforehand.
• Set the Control with HDMI to OFF.
1 Switch the receiver into standby.
2 While holding down ENTER on the front panel, press
u STANDBY/ON.
The display shows RESET
c
NO
d
.
3 Select ‘RESET’ using PRESET
k
/
l
, then press ENTER
on the front panel.
The
display shows RESET? OK.
4 Press ENTER to confirm.
OK appears in the display to indicate that the receiver has been
reset to the factory default settings.
• Note that all settings will be saved, even if the receiver is
unplugged.