Pioneer Elite VSX-55TXi Operating Instructions Manual Download Page 54

Page: 54 / 119

Basic Operation

Listening in Audio Scaler mode

Use to hear CD and DVD, as well as other digital soundtracks, at a wider dynamic range, allowing for finer audio
reproduction.

1 Press RECEIVER.

2 Press the HI-BIT button on the remote

control or HI-BIT/HI-SAMPLING
button on the front panel.

Each press switches AUDIO SCALER mode on or off. HI-
BIT/SAMPLING lights in the display.

Memo:

• This mode cannot be used with MULTI CH IN mode.
• If the receiver is in DIRECT mode and you press the HI-

BIT button the receiver will switch to STEREO mode.

• This feature cannot be used with DVD-A, SACD or

source signals greater than 88.2 kHz over a digital con-
nection (including i.LINK).

Multi Channel In Playback

MULTI CH IN allows you to connect a DVD-Audio / SACD player or an external decoder to enjoy certain multichannel
discs. To use MULTI CH IN playback follow the instructions below.

1 Press the MULTI CH INPUT button on

the remote control or the MULTI CH
IN button on the front panel.

Each press switches the input between the previous
mode and MULTI CH IN.

ON:

This is a true playback of the signal from the MULTI

CH IN terminals, output without digital processing. You
can only control each channel level.

OFF:

Cancels the MULTI CH IN modes.

Memo:

• You can’t use any kind of sound processing with MULTI

CH IN. Selecting a listening mode, or switching these
modes, cancels the MULTI CH IN.

• If any speakers are set to NO the signal for that (those)

channel(s) won’t get output at all.

• You cannot set sound features (page 51, 52, 53 and 54)

on, in MULTI CH IN mode.

• You cannot listen to the SECOND ZONE in MULTI CH IN

mode.

• If you’re listening to DVD-Audio / SACD but can only get

stereo sound set your DVD player’s 5.1 channel analog
playback to on.

VSX-55TXi.book Page 54 Tuesday, April 8, 2003 12:07 AM

Summary of Contents for Elite VSX-55TXi























































































































Search results

Summary of Contents for Elite VSX-55TXi

Reviews:

Related manuals for Elite VSX-55TXi

Brands by name

Popular brands

Pioneer Elite VSX-55TXi, Operating Instructions Manual

Search results

Summary of Contents for Elite VSX-55TXi

Reviews:

Related manuals for Elite VSX-55TXi

Brands by name

Popular brands